Settings For Overseas Use - Fujitsu F-02F Instruction Manual

Settings for overseas use

By default, the terminal is set to automatically search and
switch to an available network. To switch network manually,
perform the following operations.
If you release SIM lock and use SIM by a carrier other than
NTT DOCOMO to perform data communication, set an
access point (APN) before use. P106
Setting Network Mode
1
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks] [Network Mode]
2
[LTE/3G/GSM (Auto)]/[LTE/3G]/[GSM]
✔INFORMATION
If the mode is set to [LTE/3G/GSM (Auto)] and a GSM/GPRS
network and 3G network of the same network operator are
detected at the same time, connection to a 3G network is
given priority.
If the mode was set to [GSM] in the country you visited, set
the mode to [LTE/3G] or [LTE/3G/GSM (Auto)] after returning
to Japan.
[Settings] In
157
Setting a network operator manually
1
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks] [Network operators]
Available networks are searched for and displayed.
If an error occurs in network search, unmark [Data
enabled] and retry. P113
2
Select a network of the network operator
✔INFORMATION
If the network operator was set manually in the country you
visited, set [Network operators] to [Choose automatically]
after returning to Japan.
Setting Data roaming
1
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks]
2
[Data roaming] Check the contents on the
Attention screen, [OK]
[Settings] In
[Settings] In
International roaming