Kenwood NX-700 Service Manual page 56

NX-700/700H
Item
Panel test mode
10. LTR 1) Adj item: [An LTR]
Deviation Adjust: [✳✳✳✳]
adjust *4 Deviation meter
LPF: 3kHz
[Narrow] HPF: OFF
PTT: ON
Press [ ] key to store
the adjustment value.
[Wide] 1) Adj item: [Aw LTR]
Adjust: [✳✳✳✳]
PTT: ON
Press [ ] key to store
the adjustment value.
11. DTMF 1) Adj item: [An DTMF]
Deviation Adjust: [✳✳✳✳]
adjust *4 Deviation meter
LPF: 15kHz
[Narrow] HPF: OFF
PTT: ON
Press [ ] key to store
the adjustment value.
[Wide] 1) Adj item: [Aw DTMF]
Adjust: [✳✳✳✳]
PTT: ON
Press [ ] key to store
the adjustment value.
12. Single 1) Adj item: [An TONE]
Tone Adjust: [✳✳✳✳]
Deviation Deviation meter
(2TONE LPF: 15kHz
deviation HPF: OFF
adjust) PTT: ON
adjust *4 Press [ ] key to store
the adjustment value.
[Narrow]
[Wide] 1) Adj item: [Aw TONE]
Adjust: [✳✳✳✳]
PTT: ON
Press [ ] key to store
the adjustment value.
13. MSK 1) Adj item: [An MSK]
Deviation Adjust: [✳✳✳✳]
adjust *4 Deviation meter
LPF: 15kHz
[Narrow] HPF: OFF
PTT: ON
Press [ ] key to store
the adjustment value.
56
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [LTR Deviation
Deviation (Narrow)] meter
Deviation meter
Oscilloscope
LPF: 3kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
1) Adj item: [LTR
Deviation (Wide)]
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
1) Adj item: [DTMF
Deviation (Narrow)]
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
1) Adj item: [DTMF
Deviation (Wide)]
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
1) Adj item: [Single Tone
Deviation (Narrow)]
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
1) Adj item: [Single
Tone Deviation (Wide)]
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
1) Adj item: [MSK
Deviation (Narrow)]
Deviation meter
LPF: 15kHz
HPF: OFF
PTT: Press
[Transmit] button.
Press [Apply]
button to store the
adjustment value.
Measurement
Test-
Unit Terminal Unit
ANT
Adjustment
Specifi cations /
Parts Method
[Panel Write the value as 0.65~0.85kHz
tuning followings.
mode] 465 (Reference
[ ],[ ] value)
[PC test
mode]
[ ],[ ]
0.90~1.10kHz
Write the value as 1.40~1.60kHz
followings.
650 (Reference
value)
2.90~3.10kHz
Write the value as 1.40~1.60kHz
followings.
513 (Reference
value)
2.90~3.10kHz
Write the value as 1.40~1.60kHz
followings.
513 (Reference
value)
Remarks