Pre-Fi Lter - Hitachi EP-A6000 Instruction Manual

Pre-filter
To clean the pre-fi lter, follow the steps below.
Remove the water tank, and then pull out the water tray.
(This is to prevent water leakage.)
When you remove the tank, water may drip from the tank cap. Lay a dry cloth
CAUTION
before removing the water tank.
Remove the panel.
Remove the pre-filter.
Disengage the four tabs of the pre-fi lter.
Clean the pre-filter.
Use a vacuum cleaner or the like to remove dust. If the dust
cannot be removed, wash off with water. After washing, fully
drain the pre-fi lter and then dry it in a well-ventilated place
not exposed to sunlight.
When you wash, use a soft toothbrush or the like.
If you want to remove dust on the Dust fi lter / deodorizing
fi lter, use a vacuum cleaner. The Dust fi lter / deodorizing fi lter
is not washable.
Reattach the pre-filter.
Insert the four tabs securely into the holes on the purifier
and fi x the pre-fi lter.
Reattach the panel.
Install the water tray, and then mount the water tank.
The pre-fi lter is a consumable part.
When damaged pre-filter needs to be replaced, purchase the replacement part (Part No. EP-DV1000-002).
(Guide for cleaning: Once a month)
P.E-8
P.E-8
P.E-9
Pre-filter tab insertion
section
Vacuum
cleaner Dust filter
attachment
for
cleaning
shelves
Pre-filter tabs
P.E-9
Pre-filter
deodorizing
filter
E-21