3.3 Installation of the Hybrid IP-PBX PC Programming Software
•
When programming Hybrid IP-PBX data which can be displayed on a proprietary
telephone (PT) (extension names, group names, System Speed Dialing names, etc.),
it is possible to enter characters which cannot be displayed on a KX-T7600 series PT.
Characters which can be displayed on a KX-T7600 series PT are shown below in the
white cells.
•
The PC will not perform any shutdown operation, or enter the power-saving system
standby mode while the KX-TDA50 Maintenance Console is connected to the Hybrid
IP-PBX. To perform either of the operations above, first close the connection to the
Hybrid IP-PBX.
CAUTION
Do not remove the SD Memory Card while power is supplied to the Hybrid IP-PBX. Doing
so may cause the Hybrid IP-PBX to fail to start when you try to restart the system.
130
Installation Manual