Yamaha E115A Owner's Manual page 80

4-9
7) Pour a teaspoonful of clean engine oil
into the cylinder(s).
8) Crank several times manually.
9) Replace the spark plug(s).
EMU00336
Fuel Tank
1) Drain the fuel from the tank for a long
period of storage.
2) Store the fuel tank in a dry, well-venti-
lated place, not in direct sunlight.
EMU00345
Flushing Cooling System
cC
Do not run the engine without supplying
the engine cooling water. Either the
engine water pump will be damaged or
the engine will overheat and be dam-
aged. Before starting the engine, supply
water to the cooling water passage.
EMU00348
8 Flushing with the Flushing Attachment
w
Before using the flushing attachment,
remove the propeller. Keep yourself and
others away from the propeller shaft.
q
1) Fit the flushing attachment 1 (option)
000420
in position on the lower casing, with
rubber cups covering the cooling water
inlet.
2) Connect a garden hose between the
flushing attachment and the water tap.
3) Shift into "NEUTRAL", and start the
engine while supplying water.
4) Run the engine at low speed for a few
minutes.
605014
E