Table of Contents
Advertisement
Using the Stylus to Touch the Screen
Your Pocket PC is designed for graphics-based operation. Generally
speaking, we usually "use the stylus to perform basic actions such as tap,
drag, and tap and hold" on the touch screen. Other actions such as reset
and cold boot will require the use of the stylus tip.
Pull the stylus to full-length to make it easier to tap the screen during
operation. When kept completely in the stylus holder, the stylus length
shortens.
Avoid heavily pressing on the touch screen with the stylus or your fingers.
Sleep Mode
1. Press the POWER button of the Pocket PC to enter the Sleep mode. At this
time, the screen is turned off and all peripheral devices enter the
power-saving mode. But if the phone is turned on, it is still in the call
waiting mode.
2. To turn on the screen later, just press the POWER button.
1-14
3 .Tap
> Settings > System
tab > Power and then the
Advanced tab to set the device
to turn off automatically after
waiting for a certain time period.
Advertisement
Table of Contents
