Rear Panel - Pioneer CDJ-400 Service Manual

1
A
24. LOOP buttons
! IN/REALTIME CUE/HOT LOOP button/indicator
Use to input loop-in point.
Use to set the current playback point as cue point. (REALTIME
CUE)
When pressed during loop play, returns playback to loop-in
point and begins replay. (HOT LOOP)
! OUT/OUT ADJUST button/indicator
Use to input loop-out point. (OUT )
When pressed during loop play, adjusts loop-out point. (OUT
ADJUST )
! RELOOP/EXIT button
B
After finishing loop play, the stored loop-in/out information
can be used to begin loop play again. (RELOOP )
When pressed during loop play, loop play stops and playback
returns to normal playback mode. (EXIT )
! BEAT LOOP/LOOP DIVIDE buttons/indicator
If pressed while playing or pausing a track, the loop-end will
be calculated based on the BPM (Beat Per Minute) of the track,
and loop-play will then start (BEAT LOOP).
Pressing the – button during loop-playback will divide the
playback loop, and pressing the + button will return the
playback loop to its original length (LOOP DIVIDE).
During loop-playback, the button's indicator will light to
C
indicate that the LOOP DIVIDE button is enabled.
D

Rear Panel

E
1. USB port
Use to connect a computer.
2. AUDIO OUT L, R connectors
RCA-type analog audio output jacks.
3. CONTROL connector
When the accessory control cord is used to connect this con-
nector to the corresponding CONTROL connector on a Pio-
neer DJ mixer, the DJ mixer can be used to control the CD
player for fader start play and back cue.
Also, by connecting this connector to the CONTROL connec-
tor on another Pioneer DJ CD player, automatic relay play can
F
be performed.
12
1
2
25. SCRATCH JOG EFFECT/DIGITAL JOG BREAK
buttons
The button's function changes depending on the JOG mode.
SCRATCH JOG EFFECT buttons
•
Turns on/off each of the effects BUBBLE, TRANS, and WAH
during VINYL mode.
DIGITAL JOG BREAK buttons
•
Turns on/off each of the effects JET, ROLL, and WAH during
CDJ mode.
26. SOURCE SELECT buttons
USB select button
•
Select when playing files from a connected USB memory de-
vice. Each time the button is pressed, the function alternates
between USB and PC.
• CD select button
Select when playing CDs or files on a CD-ROM.
27. USB port
Use to connect a USB memory device.
28. TEXT MODE/UTILITY MODE button
Changes the TEXT display
Hold the button depressed to enter utility setting mode.
29. TIME MODE/AUTO CUE button
Switches the display between the track's elapsed time and re-
maining time.
Hold the button depressed to turn the auto cue function on/off.
30. Jog touch indicators
During VINYL mode, lights when the top of the jog dial is
pressed.
1 2 3 4
4. DIGITAL OUT connector
RCA type coaxial digital output connectors used to connect a
DJ mixer or AV amplifier, CD player, etc., equipped with dig-
ital input connectors. The digital outputs here support all DJ
and other functions, but only audio data is output (without
subcodes; CD graphics are not supported).
5. AC inlet (AC IN)
Use the accessory power cord to connect this inlet to a stand-
ard AC power outlet.
6. POWER v OFF/w ON switch
CDJ-400
2
3
5 6
3
4
4