Pioneer SD-533HD5 Training Manual page 29

Assembly Adjustment Location Guide
is repaired or replaced
If POWER SUPPLY ASSY
is repaired or replaced
If DEFLECTION SERVICE ASSY
is repaired or replaced
If R, G or B CRT DRIVE ASSY
is repaired or replaced
If DIGITAL CONV. ASSY
is repaired or replaced
If VIDEO IP SERVICE ASSY
is repaired or replaced
If SIGNAL ASSY
is repaired or replaced
If CRT ASSY (R, G or B)
is repaired or replaced
If LENS ASSY (R, G or B)
is repaired or replaced
If MIRROR and SCREEN
is repaired or replaced
If OTHER ASSY
Note :
*1: Readjustment necessary
*2: Turn on the power and confirm the screen. When adjustment deviates, it is readjusted if necessory.
• When the EEPROMs are replaced, check the status of the unit.
• If any IC of the EEPROM is damaged, readjustment of all the items is necessary.
• The necessary adjustment items differ, depending on the assembly or optical part replaced. Check and readjust the adjustment items
corresponding to the replaced assembly or part, following adjustment procedures 1 to 8.
Example: When the DIGITAL CONV. Assy is replaced, perform the following:
3. Focus check/adjustment → 4. Screen size check/adjustment → 5. Convergence check/adjustment
No adjustment is required
1 Brightness Adjustment (∗2)
3 Focus Adjustment (VR1: FOCUS VR) (∗2)
4 Screen Size Adjustment (∗2)
5
Convergence Adjustment (∗2)
6 White Balance Adjustment (∗2)
7 Panel Adjustment (∗1)
Panel Adjustment for 480p (∗1)
8
1 Brightness Adjustment (∗1)
6 White Balance Adjustment (Composite STD :∗1, Others :∗2)
7 Panel Adjustment (∗1)
8 Panel Adjustment for 480P (∗1)
3 Focus Adjustment (∗2)
4
Screen Size Adjustment (∗2)
5 Convergence Adjustment (∗2)
1 Brightness Adjustment (∗2)
White Balance Adjustment (Composite STD : ∗1, Others :∗2)
6
Panel Adjustment (∗1)
7
8 Panel Adjustment for 480P (∗1)
6 White Balance Adjustment (∗2)
7 Panel Adjustment (∗1)
8 Panel Adjustment for 480P (∗1)
1 Brightness Adjustment (∗1)
2
Deflection Yoke Adjustment (∗1)
Focus Adjustment (Lens : ∗2, VR1 Focus VR :∗1)
3
5 Convergence Adjustment (∗2)
White Balance Adjustment (Composite STD : ∗1, Others :∗2)
6
7 Panel Adjustment (∗1)
8 Panel Adjustment for 480P (∗1)
Focus Adjustment (Lens : ∗1, VR1 Focus VR :∗2)
3
5 Convergence Adjustment (∗2)
Convergence Adjustment (∗2)
5
No adjustment is required
29.