Panasonic KX-NCP500 Manual page 62

4.4.1 Assigning the IP Addressing Information
Follow the procedure below to assign IP addressing information manually.
To start programming
Supply power to the KX-HGT100.
To set the IP addressing information
Select "Set network".
IP Address*
Default Gateway Address*
To end programming
Press PROGRAM .
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and 255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
62 IP Networking Guide
Press PROGRAM .
Press OK. Select "STATIC".
1
Subnet Mask Address*
Press OK.
3
Press OK.
Press OK.
2
Press OK.
C. Tone
Document Version 2009-12