For The Installer - Pioneer PHR100-55 Instruction Manual

4

FOR THE INSTALLER

This manual must only be used by a qualified heating installer/service technician. Read all instructions in
this manual before installing. Perform steps in the order given. Failure to comply could result in severe
personal injury, death or substantial property damage.
This appliance must be installed by qualified and licensed personnel. The installer should be guided by
the instructions furnished with the heater, and with local codes and utility company requirements. In the
absence of local codes, preference should be given to the National Fuel Gas Code, ANSI Z223.1-2002.
INSTALLATIONS MUST COMPLY WITH:
Local, state, provincial, and national codes, laws, regulations and ordinances.
The latest version of the National Fuel Gas Code , ANSI Z223.1, from American Gas Association
Laboratories, 8501 East Pleasant Valley Road, Cleveland, OH 44131.
In Canada – CGA No. B149 (latest version), from Canadian Gas Association Laboratories, 55 Scarsdale
Road, Don Mills, Ontario, Canada M3B 2R3. Also, Canadian Electrical Code C 22.1, from Canadian
Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6.
Code for the installation of Heat Producing Appliances (latest version), from American Insurance
Association, 85 John Street, New York, NY 11038.
The latest version of the National Electrical Code , NFPA No. 70.
This product is for installation in closed loop systems ONLY! Use of this product in any manner other
than described in this manual may result in premature product failure, substantial property damage,
severe personal injury, or death. Damage or failure of this product (or the system in which it is installed)
due to unauthorized use IS NOT COVERED BY WARRANTY.