DPH-C160S – DECT Cordless VoIP Phone – User Manual
Making a Call to the PSTN in Standby Mode
If you have connected your PSTN telephone line to the DPH-C160S's Base, you
can make a telephone call to any regular telephone using the PSTN normal
telephone usage charges will apply by following these steps:
Pick up the handset and dial the number as you normally would. You can clear
any or all of the numbers you have entered by pressing the Clear button. You
will hear the familiar PSTN dial tone, the handset and L1 icon will appear on the
handset's LCD display.
This number will be dialled as you entered it.
To end the call, either press the On-hook button or replace the handset on the
charger.
PSTN Dial Tone
Press this button to dial a
telephone number (over
the regular telephone line
(PSTN)). You will hear
the familiar dial tone − and
then the handset will dial
the telephone number as
you entered it.
Keypad
You can just dial a regular
telephone number and
then press the PSTN Dial
Tone button. The number
will be displayed in the
LCD.
On-hook
Press this button to end a
telephone call. You can
also simply place the
handset in the charger
base to end any
telephone call.
This will end both a PSTN
and a VoIP telephone call.
Clear
Press this button to erase
a single digit of a
telephone number you
have entered while the
handset is in Standby
Mode. Holding this button
for a couple of seconds
will erase all of the digits
of the telephone number.
Page 15 of 67