Table of Contents
Advertisement
Section - Configuration
You may edit a rule from the list by clicking on the
To access the FTP server from your local network, open a web browser and enter ftp://device name, where device
name is the name assigned to the DSM-600. If you did not change the name, the default name is "dlink-xxxxxx" where
xxxxxx is the last six digits of the DSM-600's MAC address. You may also enter the IP address of the device.
If you are behind a router, you will need to forward the FTP port to the DSM-600. Additional filtering and firewall
settings may need to be modified on your router to allow FTP access to the DSM-600 from the Internet. Once the port
is forwarded to the DSM-600, users from the Internet will enter ftp:// followed by the WAN IP address of the router
(e.g. ftp://64.56.23.111).
If you are using a D-Link router, such as the WBR-2310 used in the example below, your port forwarding rule should
be similar to the following:
Name
Name the DSM-600 FTP server
rule.
IP Address
Enter the IP address of the
DSM-600.
Public Port
Enter the public FTP port. By
default, the port is 21.
Private Port
Enter the private FTP port. By
default, the port is 21.
Traffic Type
Set the traffic type to TCP.
If you are using a port other than 21, you must enter a colon (:) followed by the new port number in the URL to connect
(e.g. ftp://ftp.mysite.com:3000).
Please consult your router's user manual for more information on port forwarding.
D-Link DSM-600 User Manual
icon. To delete a rule from the list, click on the
icon.
0
Advertisement
Table of Contents
