CHAPTER 10.
Description and Programming
Procedure
This chapter provides networking description and programming procedure of OfficeServ
100 system.
10.1 Networking
This function allows you to operate multiple systems as if operating a single system.
Digital phone
The networking function of OfficeServ 100 system uses Q-SIG(Q Signaling), and is
classified into(TE)PRI Networking and VoIP Networking depending on the connection
method between each system.
OfficeServ 100 system using Q-SIG provides the functions below.
© SAMSUNG Electronics Co., Ltd.
Networking
Figure 10.1 OfficeServ 100 Networking Conceptual Diagram
OfficeServ 100 Installation Manual
Q-Sig
Digital phone
10-1