NEC Univerge SV8100 General Description Manual page 93

UNIVERGE SV8100
Combined Paging
Use Combined Paging when you want to simultaneously Page into an internal and
corresponding external zone. For example, you can Page your company warehouse
and outside loading dock at the same time. Combined Paging is available for Paging
zones 1~8 and All Call. Optionally, you can change the Combined Paging
assignments. For example, you can associate External Paging Zone 1 with Internal
Paging Zone 4. You can program a Function Key as a Combined Paging key. When
an All Call External Page Function Key is programmed, it includes both the external
zones and the assigned internal zone(s). If the internal page zone is busy or there are
no extensions in a page group, the announcement is made on the external zones
only.
Park
Enhancements
Calls can be parked from a virtual extension (Version 3000 or higher software).
Park places a call in a wait state (called a Park Orbit) so that an extension user may
pick it up. There are two types of Park: System and Personal. System Park allows a
user to have a call wait in System Orbit. Personal Park allows a user to Park a call at
their extension so a co-worker can pick it up. After parking a call in orbit, a user can
Page the person receiving the call and hang up. The paged party can dial a code or
press a programmed Park key to pick up the call. With Park, it is not necessary to
locate a person to handle their calls. A call parked for too long recalls the extension
that initially parked it, however the call remains in the park orbit until it is answered.
There are 64 Park Orbits (1~64) available for use.
Extended Park
An extension Class of Service determines whether it uses the normal Park Orbit
Recall time or the Extended Park Orbit Recall time. The times are set in system
programming. When an extension with Extended Park Recall Class of Service option
parks a call, it recalls after the Extended Park Orbit Recall time. When an extension
with the Normal Park Orbit Recall Class of Service option parks a call, it recalls after
the normal Park Orbit Recall time, however the call remains in the park orbit until it is
answered.
Programmable Function Key and Service Code Available for Personal Park
The Personal Park feature is enhanced by using a Programmable Function Key or
service code (3-digit or 1-digit) to place a call in Personal Park. This option is
available for multiline terminals, single line sets, and UNIVERGE SV8100 Wireless
telephones and can be used for analog or ISDN trunks.
General Description Manual
Issue 5.02
2 - 51