L2Tp - D-Link DIR-615 User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunnelng Protocol) f your ISP uses a L2TP connecton. Your ISP wll provde you wth a username and password. Ths opton
s typcally used for DSL servces.
Address Mode: Select Static f your ISP assgned you the IP address,
subnet mask, gateway, and DNS server addresses. In most
cases, select Dynamic.
L2TP IP Address:
Enter the L2TP IP address suppled by your ISP (Statc
only).
L2TP Subnet Mask: Enter the Subnet Mask suppled by your ISP (Statc
only).
L2TP Gateway:
Enter the Gateway IP Address provded by your ISP.
L2TP Server IP: Enter the Server IP provded by your ISP (optonal).
Username: Enter your L2TP username.
Password:
Enter your L2TP password and then retype the password
n the next box.
Reconnect Mode: Select ether Always-on, On-Demand, or Manual.
Maximum Idle Time:
Enter a maxmum dle tme durng whch the Internet
connecton s mantaned durng nactvty. To dsable ths
feature, enable Auto-reconnect.
DNS Servers: Enter the Prmary and Secondary DNS Server Addresses (Statc L2TP only).
D-Lnk DIR-615 User Manual

L2TP

22