Status Display - Mitsubishi Electric NJ-EXSA10JH Instruction Manual

Tips
When You Cannot Cook Rice Well
Category Trouble
Rice has odor.
Rice becomes yellow.
Rice dries up.
When rice has odor.
P.18 ATTENTION
<Status Display>
Displays the status of the main unit on the LCD display.

Status Display

Causes and Solutions
Did you keep the rice warm for more than 24 hours?
Did you close the lid firmly?
Did you keep the rice warm with the rice scoop inside?
Did you add cold rice to the rice that is being kept warm?
Did you rinse the rice sufficiently?
If the rice bran remains, the rice will absorb the odor.
Did you make a reservation of more than 12 hours in summer?
Soaking the rice in water for a long time may cause the water to deteriorate,
resulting in odor.
Did you cook the rice after cooking mixed rice or the like?
If you use seasonings, the odor remains. Wash the inner pot, heat sink, and
cartridge carefully.
Cooked rice may appear yellow depending on the type of rice and water.
If you cook the rice in alkaline water with a pH value of 9 or more, or mineral
water with a high degree of hardness, the cooked rice appears yellow.
Are the heat sink, cartridge, bush, and other parts free from dirt, or did you forget to
attach them?
Are foreign objects such as rice grains stuck to the area between the edge of the inner
pot and the lid packing?
Remove them.
Displayed in the following cases
is not pressed after setting
a reservation.
(If the reservation is not confirmed.)
There is no water in the tank.
There is only a small amount of
water in the tank.
There is no tank.
There is too much water in the tank.
There is a buildup of white scale on
the walls of the tank.
The water in the tank is hot.
Rice is cooked with hot water in
the tank.
(cont.)
P.6
P.10–11
P.22–24
P.22–23
Remedy
Press to clear
" " display.
Set the reservation again, and then press
last to confirm the reservation.
There is not enough water in the tank.
Increase the amount of water, and then start
again from the beginning.
Reduce the amount of water, and then insert the
tank properly.
Wash the tank if it is dirty.
Replace the hot water in the tank with cold
water.