Sony KZ-32TS1U Training Manual page 23

n) The inside of the TV screen is coated so do not clean or leave oil on it by touching it. The inside surface
scratches easily. Clean the inside of the TV screen if there is film or fingerprints. Use the Sony p/n X-4034-
197-1 soft cloth and diluted mild window cleaner if necessary. A 50% mix of water and window cleaner is OK.
Do not use dishwashing detergent or soaps.
Reassembly
Assemble in the reverse order:
•
Screw the power supply board onto the Plasma Panel (Figure 8-10).
•
Position the Plasma Panel into bezel (Figure 8-10).
•
Fasten left and right support brackets over the handles (Figure 8-9).
•
Snake the H1 board cable harness into the TV board assembly rear and secure the assembly (Figures 8-6 &
8-8).
•
Plug in the connectors. Make sure these test connectors on the B and Q boards are empty (Figure 8-13
shows the location of empty CN1003, CN1002, CN1201 and CN3008).
Figure 8-12 - Front Glass Screen
B Board
Q Board
8. Plasma Panel Replacement - KZ-32TS1U
`
CN1003
CN1002
CN1201
CN3008
21
Figure 8-13 - Unused
Test Connectors