Presetting Fm/Am Radio Stations - Sony HT-M7 Operating Instructions Manual

3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
Tip
Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to
an AM station.
4
Press ENTER.
If you cannot tune to a station
"–––.––MHz" or "––––kHz" appears and
then the display panel returns to the current
frequency.
Make sure you have entered the right
frequency. Try repeating steps 2 to 4. If you
still cannot tune to a station, the frequency
may not be in use in your area.
Changing the AM tuning scale
(Latin America, Argentina and
Mexico models only)
You can change the AM tuning scale to either
9 kHz or 10 kHz.
1
Press TUNER repeatedly (or
press AM) to select AM.
2
Press AMP MENU.
3
Press V/v repeatedly to select
"TUNER", then press
4
Press V/v repeatedly to select
"AM STEP", then press
5
Press V/v repeatedly to select
the AM tuning scale you want.
Note
All AM preset stations will be erased when you
change the tuning scale.
38
GB
Presetting FM/AM radio
stations
You can store up to 30 FM and 30 AM stations
as your favorite stations as preset stations.
TUNER
2)
FM
Numeric
buttons
V/v/B/b
PRESET
+/–
1)
RM-AAU135 only.
2)
RM-AAU136 only.
1
Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
You can also use INPUT SELECTOR on
or b.
the receiver.
2
Tune to the station that you
want to preset using Automatic
or b.
Tuning (page 37) or Direct
Tuning (page 37).
3
Press MEMORY.
1)
/
,
2)
AM
MEMORY
ENTER
AMP
MENU