Table of Contents
Advertisement
TROUBLESHOOTING
This section provides typical malfunctions that can occur during the
operation of the Digital Car Kit, and suggests corrective actions.
Prior to troubleshooting the malfunction, verify the following:
1.
Your radio functions properly outside the cradle.
2.
All cables to the junction box are connected and fastened properly.
Identify the malfunction in accordance to Table 2 below. If the
malfunction does not appear in Table 2, refer to your Service Provider.
Follow Table 2 steps after inserting the radio into the cradle .
Table 2: Troubleshooting Procedures
No.
Malfunction
1
Radio inserted in
cradle does not
recognize car kit
2
Display messsage
'Car Kit Connected'
is not displayed.
3
Charging Indication
(LED) is not
illuminated, when a
portable radio is in
the cradle.
Corrective Action
1.
Verify that the radio is properly inserted into
the cradle of the car kit.
2.
If malfunction persists, refer to your
service provider .
1.
Remove the radio from the cradle and install
it again.
2.
Verify that the cradle connector is properly
connected to the junction box.
3.
If the malfunction persists, refer to your
Service Provider.
1.
Remove the handset from the cradle and
install it again.
2.
Verify that the cradle connector is properly
connected to the junction box.
3.
If the malfunction persists, refer to your
Service Provider.
4.
Battery charging temperature below -30
increase temperature.
°C,
17
Advertisement
Table of Contents
