Table of Contents
Advertisement
Screen displays (continued)
14 Audio level meter display
Displays the input level during recording or
recording standby, and the level of the audio
that is playing during playback.
• You can switch between displaying and
not displaying this information by selecting
[LEVEL METER] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
• There is no output to external devices.
15 Focus bar display
Displayed when [FOCUS BAR] → [ON] in the
[DISPLAY SETUP] setup menu is selected.
• The bar extends toward the right when the
subject is brought into focus.
16 Camera functions display
(In CAM mode: Page 50)
When the [ENTER] button is pressed, the
selected camera shooting function is displayed.
F
: Focus adjustment
I
: (Iris) Aperture and brightness
adjustments
S
: Shutter speed adjustment
W
: White balance setting
17 Auto iris control display (In CAM mode)
STD:
Standard auto-iris control
SPOT: Auto iris control for spotlight (Page 39)
BACK: Auto iris control for backlight
compensation (Page 39)
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
18 Iris display (In CAM mode: Page 50)
Displays the F value.
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
19 Zoom position display
(In CAM mode: Page 48)
Displays the zoom position with Z00 (maximum
wide-angle) - Z99 (maximum zoom).
• You can switch between displaying and
not displaying this information by selecting
[ZOOM & FOCUS] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
20 SDI through output display
(In SDI mode: Page 89)
When [SDI EE SEL] → [THROUGH] is
selected in the [AV OUT SETUP] setup menu,
"THROUGH" is displayed.
• There is no output to external devices.
74
21 Focus control information display
(In CAM mode: Pages 50, 85)
Displays the focus control information with
99 - 00.
In the auto focus mode, AF is displayed, and
in the manual focus mode, MF is displayed.
When the macro control function is operating,
the black and white of AF or MF are
displayed in reverse.
95 (Focal distance: infinity)
:
00 (Focal distance: approx. 5 cm)
• Depending on the zoom position, the macro
range may not be enabled. Also, depending
on the zoom position, the lower limit value of
the macro range may be different.
• You can switch between displaying and
not displaying this information by selecting
[ZOOM & FOCUS] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
22 Index/shot mark recording display (Page 40)
MARK ON: Displayed when a shot mark is
added.
MARK OFF: Displayed when a shot mark is
canceled.
INDEX: Displayed when an index is added.
• "INVALID" is displayed if an index or shot
mark cannot be added.
23 Gain display (In CAM mode)
Displays the current gain value.
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
24 AWB information display
(In CAM mode: Pages 39, 53)
Displays information for white balance.
ATW: When ATW is set
P3.2K/P5.6K: When preset is used
W.SET: When white balance is adjustable
LOCK: When ATW is locked
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
25 Optical Image Stabilizer display
(In CAM mode: Page 49)
Displayed when the Optical Image Stabilizer
is [ON].
• You can switch between displaying and
not displaying this information by selecting
[OTHER DISPLAY] → [ON] or [OFF] in the
[DISPLAY SETUP] setup menu.
Advertisement
Table of Contents
