Page 1
Digital Copier Operating Instructions (For Copier) Model No. FP-D355/D355DC FP-D455/D605 Options FA-A355/A888/F320/F350/F355/F365/FK35/FK36/TR350/TR355/RU350/RU355 FA-DS725/DS825/MA301/MADM8 FP-D 350 Before operating this copier, please read The digital copier with options these instructions completely and keep these (See P .56) operating instructions for future reference.
Energy Star The FP-D355/D355DC/D455/D605 series copiers comply with Tier 2 of the Environmental Protection Agency’s Energy Star Program. This voluntary program specifies certain energy consumption and usage standards for copiers. These copiers will automatically “power down” after a specified period of non-use. The use of these Energy Star compliant copiers will reduce energy consumption and ultimately benefit the environment.
Table of Contents Before Operation Operation Chart Common features and usage ............... 4 Function Categories ................5 Precautions ............................ 6 Control Panel Control Panel ..................9 Touch Panel Display ................10 Making Copies Basic Menu Full Size Copying ................12 Reduction or Enlargement Copying ............
SORT/ USER FP-D455 FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FP-D605 FLS•B4 FP-D355 FP-D355DC Copy size Number of copies Place paper (reduction/ (Up to 999) Turn the Power enlargement only) Switch on (FP-D355/D355DC) Turn Operation Switch On Position original...
Precautions For your safety Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. Caution This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Page 7
(55 – 130 g/m via sheet bypass) may be used. C For optimum copy quality, it is essential that Panasonic Brand Toner is used in the copier. Ventilation The copier should be installed in a well-ventilated area to minimize the ozone density in the air.
Page 8
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR OFFICE THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
Control Panel Control Panel # $ % & ( ) * MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Original Size Copy Size Touch Panel Display Quantity Start Key Ready Keys Keys Keys Indicator Contents Refer to Multi-Size Feed Key P .58 C When Multi-sized originals are copied using i-ADF/ADF (Option).
C Benefits of QUARC (QUAlitative Reasoning based adaptive Controller). NOTE The FP-D355/D355DC/D455/D605 series features exclusive new Panasonic imaging technology which utilises an advanced form of artificial intelligence to ensure optimal copy quality and performance under varying environmental conditions, from a wide range of originals.
Basic Menu Reduction or Enlargement Copying When copying with preset ratios There are 5 preset reduction and 5 preset enlargement modes. MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Position Select the copy size Number of Press Start original copies...
Basic Menu Using the Sheet Bypass To copy on letterhead, mailing labels, transparencies and odd-size paper, etc., or to use the bypass as an additional paper source. Position original. Open the Sheet Bypass. Sheet Bypass Pull out the Sheet Bypass tray until it stops.
Duplex/Original H H H H H Copy Initial Screen Select function ZOOM/ INSERTION DUPLEX/ Job memory ZOOM/EFFECTS INSERTION JOB BASIC MENU Basic Menu MEMORY EFFECTS ORIG. --> COPY Book 2 page ∗ C Touch the desired key to select the function. From single sided originals to double 1 \ 2 ⇒...
Even number original % Touch OK key. CANCEL & Return Originals to the ADF/i-ADF. C To reset a mode selected using the menu, touch Cancel key on the touch panel. NOTE C FA-A355 is only available for the model FP-D355/D355DC.
Duplex/Original H H H H H Copy Book \ \ \ \ \ 2 Copy Book \ \ \ \ \ 2 Copy From book originals to double sided copies A3 size originals only. (Book Format) (Facing Pages) MULTI-SIZE SORT/ USER FEED FINISH...
Duplex/Original H H H H H Copy 2 Page Copy 2-Page Copy Copying two facing pages of an A3 size original on two separate A4 size sheets. A3 size originals only. Procedure MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER...
Duplex/Original H H H H H Copy N in 1 copy N in 1 copy Booklet From two/four/eight single sided originals, side From four single sided originals, side by by side, to single sided copies. (See page 21-24) side, to double sided copies. (See page 24) Using FA-F365 Others Procedure...
Duplex/Original H H H H H Copy N in 1 copy N in 1 copy Combination for N in 1 copy operation. Mode Originals Layout Operation 2 in 1 See page 21 4 in 1 See page 22 1 2 3 4 1 3 5 7 4 3 2 1 7 5 3 1...
Duplex/Original H H H H H Copy N in 1 copy 2 in 1 Copy From two single sided originals, side by side, to single sided pages. Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Face-Down Face-Up...
Duplex/Original H H H H H Copy N in 1 copy 4 in 1 Copy From four single sided originals, side by side, to single sided pages. Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Face-Down Face-Up...
Duplex/Original H H H H H Copy N in 1 copy 8 in 1 Copy From eight single sided originals, side by side, to single sided pages. Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Face-Down Face-Up...
Duplex/Original H H H H H Copy N in 1 copy Booklet Copy From plural single sided originals, side by side, to single sided pages. Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Face-Down Face-Up Copy size Touch N in 1 mode...
Duplex/Original H H H H H Copy 1 to N Copy 1 to 2 Copy 1 to 4 Copy From one single sided original to two From one single sided original to four single sided copies. single sided copies. Procedure i-ADF MULTI-SIZE SORT/...
Duplex/Original H H H H H Copy SADF MODE SADF (Single Automatic Document Feeder) Function A special original (like thin paper etc.,) can be fed from the i-ADF original tray and copied continuously with manual operation. Select SADF setting “Yes” in the user preset mode before using this function. (See page 49) Procedure i-ADF MULTI-SIZE...
Zoom/Effects Zoom Copying Zoom Auto Zoom Copies with variable zoom ratios from 25% Copy ratio can be selected automatically by to 400% in 1% increments. selecting the paper size. MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Number of Position...
Zoom/Effects Centering/Mirror/Inverse copy Centring Mirror Copy image can be centred A mirror image can automatically automatically on selected paper. be made. Inverse Negative/Positive image can be made for interesting effects. Procedure MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4...
Zoom/Effects Edge/Margin/Book Mode Reset Key: To reset each mode menu. Procedure MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Position Select Zoom/ Select Edge Select Number of Press original Effect mode paper copies Start Margin or Book (Up to 999) Edge # Select vertical or horizontal edge...
Zoom/Effects Page Numbering Feature The page number can be automatically printed on each page. MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Position Select Zoom/ Select Page Select Number of Press Start original Effect mode paper copies Numbering (ADF/i-ADF...
Insertion Job Initial Screen Select function DUPLEX/ ZOOM/ INSERTION Job memory ZOOM/EFFECTS INSERTION JOB BASIC MENU Basic Menu MEMORY ORIG. --> COPY EFFECTS Presentation OHP interleaving Page insertion Cover C Touch the desired key to select the function. Cover ⇒ See P .33 Adds cover page(s) to the copies.
Insertion Job Cover/Page insertion Cover Page insertion Adds cover page(s) to the copies. Inserts paper between the copies. Blank Paper Copied Paper Blank Paper Copied Paper Cover Cover Cover Cover Back Back Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT...
Insertion Job OHP Interleaving/Presentation OHP interleaving Presentation Inserts paper between OHP Inserts paper between OHP film and makes copied sets film. for hand-outs. Blank Paper Copied Paper Blank Paper + Copies Copied Paper + Copies Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET...
Other Features Job Memory Five copy jobs can be programmed in memory (M1 to M5) for recall at a later time. MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 To store a job into a memory Job memory Select Mem.
Other Features Digital Skyshot Modes To copy from the platen with the platen cover or ADF open. Two types of skyshot modes can be selected. Manual Skyshot Mode: Making copies from small originals without dark areas around the image. Digital Skyshot Mode: Copies can be automatically adjusted although they are not placed in parallel to the original guide.
Other Features Digital Skyshot Modes Operation For Manual Skyshot Mode: i-ADF Platen MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Install the (1) Position original Select M1 or M2 Number of Press Start (2) Adjust the guides copies check feeder (i-ADF)
C Energy saver time (15 minutes) and Auto off time (60 minutes) can be changed by key NOTE operator. (See P .44) Power Consumption Warm Up Time Modes FP-D355/D355DC FP-D455/D605 FP-D355/D355DC FP-D455/D605 Normal Operation Approx. 200 Wh Approx. 230 Wh None None Power Saving Mode Approx.
Other Features Combining Function Table DUPLEX/ORIG. INSERTION ZOOM/EFFECTS Other Functions H COPY Later Selections First Selections 1 \ 2 – – – – O – – O O O O O O O – – – – O O O O O O O O – O 2 \ 1 –...
User Preset User Preset modes allow you to change the initial copy mode, if necessary. Options General Copier Printer File Settings Functions Settings Settings Input Identification Code General Copier File Settings Printer Functions for Settings for for Key Settings for Key Operator Key Operator Operator...
User Preset General Functions User Preset modes allow you to change the initial copy mode, if necessary. User preset mode; general User preset mode; general select item select item 00 Finisher mode default Nonsort 05 Hard disk status 01 Staple position Front 06 Departmental counter 02 Power on default mode...
User Preset Copier Settings User Preset modes allow you to change the initial copy mode, if necessary. User preset mode; copier User preset mode; copier select item select item 00 Margin value default 10mm 05 Reduce N in 1 for space 01 Edge value default 06 Digital skyshot setting Freeshp...
Page 43
User Preset User Preset modes allow you to change the initial copy mode, if necessary. User preset mode; copier select item 10 Skyshot paper selection 11 Booklet scanning 1 time 14 Key operator mode 3 / 3 Screen Modes Function Initial setting 10 Skyshot paper selection Select skyshot operation.
User Preset General Functions for Key Operator Input key operator ID code to change settings. User preset mode; general User preset mode; general select item select item 00 Paper size None 05 Special paper tray 1 01 Auto reset time 1 min.
User Preset Input key operator ID code to change settings. User preset mode; general User preset mode; general select item select item 10 Original set beep sound 15 No ID operation Free 11 Orig. set sound ADF 16 User registration 12 Unknown file access def Group 17 User delete...
User Preset General Functions for Key Operator Input key operator ID code to change settings. User preset mode; general User preset mode; general select item select item 20 Date time setting 22 TCP/IP address 23 TCP/IP subnet mask 24 TCP/IP default gateway 29 DD file server IP add.
User Preset Input key operator ID code to change settings. User preset mode; general User preset mode; general select item select item 30 Hard disk backup select Manual 35 Hard disk backup Stop 36 System version update Stop 31 Hard disk backup time 37 User ID input 32 Hard disk backup day Sunday...
Page 48
User Preset General Functions for Key Operator Input key operator ID code to change settings. User preset mode; general select item 40 Fold position (A3/Ledger) 41 Fold position (B4) 42 Fold position (A4/Letter-R) 43 Fnisher bin def. timer 44 (Reserved) Screen Modes Function...
User Preset Copier Settings for Key Operator Input key operator ID code to change settings. User preset mode; copier User preset mode; copier select item select item 10 Maximum copy setting 11 Multisize rotation 16 Memory overflow warning Print × 12 M1, size 17 Document save default ×...
Page 51
User Preset User Setting Paper size priority Specifies the paper size in manual paper size setting mode. Press user preset key MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Proceed according to screen order # Touch copier setting. GENERAL FUNCTIONS COPIER SETTINGS $ Proceed to next page..
Page 52
User Preset User setting for key operator Check paper size The paper trays are designed to accommodate A5, A4, A4R, B4·FLS and A3 size paper. To change the paper size, perform following steps as shown below. Press user preset key MULTI-SIZE SORT/ USER...
Page 53
User Preset Change paper guide inside of paper drawer and paper size indicator # Pull out paper drawer and remove paper. $ Move paper guide a to the paper Paper Guide a a a a a length required. % Move paper guide b to the paper width required.
Page 54
User Preset User Preset modes for Key operator. Departmental counter Key operator can manage, limit copies, counters and code numbers for each department. (Maximum department number: 100) Press user preset key MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4...
Page 55
User Preset Change Number of Department counter, limit copy and code number. Number of Department counter Departmental counter data # Select required department using the scroll key. TOTAL DEPT. $ Input “0” means clear all counts. COUNTER MAX. COPIES I.D CODE COUNTER 012346 000000...
Options Options 2 Bin Finisher (FA-F320 for FP-D355/D355DC) ADF, Automatic Document Feeder C When hole punching copies. (FA-A355 for FP-D355/D355DC) (Lower bin functions) i-ADF, Inverting Automatic Document C A4 size only. (Except A4 C) Feeder C Single position stapling. (FA-A888) C Offset sets automatically C To feed originals automatically.
Options ADF (FA-A355)/i-ADF (FA-A888) 1. Features # Automatic original feeding C The ADF/i-ADF tray can hold up to 50 originals of 80 g/m paper. (30 originals/B4·FLS, A3) It can accommodate originals from A5 to A3 size (50 to 110 g/m C Automatic original size detection.
Options 3. Operation Operation Procedure i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Face-Down Face-Up Select Multi- For Duplex copy Number of Press Start Position size feeding (FA-A888) copies original Inappropriate originals C Paper with a smooth surface such as glossy C Paste-ups and coated papers C Pressure sensitive paper or paper with...
Options 3 Bin Finisher, Exit Guide Unit (FA-F350/F355/FK35/FK36) 1. Features FA-F350/F355 (3 Bin Finisher) Shift-group Shift-sort Staple-sort C Shift electronic sort copy C Staple electronic sort copy C Up to 50 originals (A4)/30 originals (A3, B4, A4 C) C Paper Weight: 64 – 80 g/m FA-FK35/FK36 (Exit guide unit) C Feeds paper to 3 bin finisher 2.
Options 3 Bin Finisher, Exit Guide Unit (FA-F350/F355/FK35/FK36) 3. Operation Interrupt Tray When using interrupt copy mode. 1 Bin 2 Bin 3 Bin (1) Bin Capacity (sheets) Modes Paper Size Interrupt 1 Bin 2 Bin 3 Bin Tray Staple-sort None or (30 sets) (20 sets) A4 R, B4⋅FLS, A3...
Options 3 Bin Finisher (3) When replacing the staple cartridge The message shown on the left appears Add staple when the staples are out. Open the stapler cover. Stapler cover # Turn the lock knob in counter clockwise direction. $ Pull out the staple unit until it stops. Lock Knob # Remove the empty staple cartridge.
Options 2 Bin Finisher, Exit Guide Unit (FA-F365/FK36/SP30) 1. Features FA-F365 (2 Bin Finisher) Shift-group Shift-sort Staple-sort Punch C Shift electronic sort copy C Staple electronic sort C Stack by punch copy C Up to 50 originals (A4)/30 originals (A3, FA-FK36 (Exit guide unit) B4, A4 C) C Feeds paper to 2 bin finisher...
Options 3. Operation Punch Unit (Option/FA-SP30) When punching the copies (2 or 3 holes) 1 Bin 2 Bin Saddle Sticher Tray When using the Booklet copy mode (See page 24) (1) Bin Capacity (sheets) Modes Paper Size 1 Bin 2 Bin Staple-sort or (30 sets) A4 R, B4⋅FLS, A3...
Options (3) When replacing the staple cartridge The message shown on the left appears Add staple when the staples are out. Open the stapler cover. Stapler cover # Turn the lock knob in counter clockwise direction. $ Pull out the staple unit until it stops. Lock Knob # Remove the empty staple cartridge.
Options (4) When supplying the saddle stitcher unit with staples Supplying the Saddle Stitcher Unit with Staples To install a new staple cartridge perform the following steps. Open the lower front cover. Slide out the stitcher unit. Pull the stitcher unit to the front once, and then shift it up.
Options Fit the new cartridge. Pull the stitcher to the front once, and then return it to its original position. Push in the stitcher unit, and close the lower front cover.
Options 2 Bin Finisher, Exit Guide Unit (FA-F320/FK35/FK36) 1. Components Upper Bin C Stack face up C Hole Punch Lower Bin C A4 size only. (Except A4 C) C Stapling (Up to 30 originals) C Shift electronic sort C Stack face down FA-F320 2.
Page 68
2 Bin Finisher, Exit Guide Unit 3. How to use i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Face-Down Face-Up Platen Staple Position Position Select Sort/ Select Number Press original Finish key of copies Start sort mode Face-Down Select the type of copy group mode into 2 bin...
Options 4. When replacing the staple cartridge The message shown on the left appears Add staples when the staples are out. Non-sort Sort Sort/rotate Group/rotate Punch Shift-sort Shift-group Staple-sort Pull out the finisher. Open the stapler cover. # Lift up the lock lever. $ Raise up the stapler unit.
Options # Remove the empty staple case. $ Install the new staple case. Pull out the tape. Insert the staple cartridge. Return the stapler unit to the original position. # Close the stapler cover. $ Return the finisher to the original position.
Options 5. If the unit fails to staple after replacing the staple follow the instruction below. Remove the staple cartridge according to staple replacing procedures steps 1 to 4. (See P .69) # Open the staple cover. $ Remove the jammed staple. % Close the staple cover.
Options Inverting Shift Tray (FA-TR350/TR355) 1. Feature Copies are stacked on the upper bin. (Lower bin is for printer function) Original Shift Rotate Offset using electronic Sort by rotating sets sorting 2. Operation i-ADF MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT...
Handling Adding Paper 550 Sheet Paper Tray Pull paper tray out of copier. Do not load ADU with paper. (Option) Place paper into paper tray. Special papers, like glossy paper, mailing labels and transparencies cannot be used in the paper tray. Use bypass for special paper.
Page 74
Handling Adding Paper 3000 Sheet Large Capacity Cassette (LCC) # Open the door. $ The paper feed tray will go down. Do not touch the tray while it is moving. Paper Feed Tray ADD PAPER After tray stops, place paper neatly on to tray.
Return the toner hopper assembly to original position. Close front panel. C For optimum copy quality use the recommended Panasonic toner. Store ATTENTION toner in a cool dark place. Do not unseal toner before use. Use it as fast as...
Handling Replacing the Waste Toner Bottle When U14 appears Open the front cover. Slowly pull the waste toner box straight out. Do not squeeze the bottle. Close the box with the enclosed cap. Install a new waste toner box. Do not insert the bottle from the top. Close the front cover.
Handling Removing the Punch Dust When the punch dust is full (For FA-F365) The message shown on the left appears Punch Trash box is full. when the punch dust is full. Empty Punch trash box. To empty the punch scrap tray, perform the following steps. Open the front cover of the puncher unit.
Handling Removing a paper misfeed If a paper misfeed should occur, the misfeed indicator and misfeed position(s) will be shown on the touch panel display. MULTI-SIZE SORT/ USER FEED FINISH PRESET ENERGY MANUAL INTERRUPT RESET SAVER FLS•B4 Paper Misfeed Positions A: The paper exit area: (See P .79) B: Paper transport area (See P .80) Copier...
Handling Paper exit area # Open front panel. $ Open exit cover. Note: If Finisher or Inverting shift tray is installed, move from the machine before above operation. # Turn the left paper clearing knob. $ Remove the misfed paper. Left Paper Clearing Knob Caution: This fuser area will be hot.
Handling Paper transport and paper entry areas Open front panel. Front Panel # Lower lever a. $ If copy paper is fed far into the copier, turn the right paper clearing knob. % Remove the misfed paper. & Raise lever a to original position. Right Paper Lever a a a a a Clearing Knob...
Handling System console/Large Capacity Cassette System console # Open the paper feed cover. $ Remove the misfed paper. % Close the paper feed cover. Paper Feed Cover Large Capacity Cassette # Hold the latch and slide the large capacity cassette to the right. $ Remove the misfed paper.
Handling i-ADF Entry Area # Open entry cover. $ Remove the misfed paper. % Close entry cover. Entry Cover # Open the i-ADF. Entry Cover $ Open entry cover. % Remove the misfed paper. & Close entry cover and the i-ADF. Exit Area # Open the i-ADF.
Handling Automatic Duplex Unit (ADU) Pull out automatic duplex unit. # Open paper guide plate a. Paper Guide Plate a a a a a . $ Open paper guide plate b. % Remove misfed paper. Paper Guide Plate b b b b b . &...
Handling Paper feed unit # Close exit tray. $ Open the paper feed cover. % Remove the misfed paper. & Close the paper feed cover. ( Put exit tray back. Paper Feed Cover Paper exit # Open the paper feed cover. $ Remove the misfed paper.
Handling Inverting Shift Tray (FA-TR350), Inverting Unit (FA-RU350/RU355) # Hold release lever. For FA-RU350/RU355: Open the Finisher to the left. $ Open inverting shift tray until it stops. Release Lever # Open transfer guide. $ Remove the misfed paper. % Close transfer guide. Close inverse shift tray.
Handling 2 Bin Inverting Shift Tray (FA-TR355) # Hold release lever. Release Lever $ Open the 2 bin inverting shift tray to the left until it stops. Pull out gently. # Open transfer guide. $ Remove the misfed paper. % Close transfer guide. Return the 2 bin inverting shift tray to the original position.
Page 87
Removing a paper misfeed 3 Bin Finisher (FA-F350/F355) Press the lock release button and open the finisher to the left. Pull out gently. Lock release button Open the interrupt tray Interrupt Tray # Open the top cover. $ Open the buffer roller cover. % Remove the misfed paper.
Handling 2 Bin Finisher (FA-F365) Removing misfed paper(s) from the Finisher Unit To clear a jam from the finisher, perform the following steps. Note: If the paper jammed in the finishers Infeed Guide, it can be removed by opening the front door of the copier.
Handling Lift the buffer roller cover, and remove misfed paper. Lift the buffer roller, and remove misfed paper. Return the buffer roller and the buffer roller cover to their original positions, and close the upper cover. Return the finisher to its original position.
Handling 2 Bin Finisher/Saddle Stitch Unit (FA-F365) Removing misfed paper(s) from the Saddle Stitcher Unit To remove a jam from the Saddle Stitch Unit, perform the following steps. Holding the finisher as shown, move it to detach it from the copier.
Handling Turn the knob on the left ccw while pushing it in. # Open the saddle exit cover. $ Remove misfed paper. % Close the saddle exit cover. Open the Infeed Cover, and remove misfed paper. Close the lower front cover. Return the finisher to its original position.
Handling 2 Bin Finisher (FA-F320) C Make sure that the misfeed indicator goes off after removing all misfed paper. # Lift up the upper cover. $ Remove misfed paper. # Pull out the finisher. $ Pull out the trash box. (See P .71) % Open the stapler cover.
Checking Troubleshooting Before you call service Check Action Unit does not operate Check if the Power Switch is turned on and Does the display light? if the power plug is inserted into the outlet. (See P .9) Does the Energy saver key flash (or light) Press Energy saver key on control panel.
Page 94
Checking Troubleshooting Check Action Copies are light Touch the “dark” key or touch the “Auto” Does the exposure indicator say “light”? key to choose the auto mode. (See P .12) Does the add toner indicator and message Add toner. (See P .75) appear on displays? Copies are marked Is the copier platen glass or platen cover...
Page 96
Specifications i-ADF (FA-A888), ADF (FA-A355) Original Capacity: 50 sheets/A5, A4 30 sheets/B4⋅FLS, A3 Paper Size: A5, A4, A4 R, B4⋅FLS, A3 50 – 110 g/m Paper Weight: Electrical Requirements: Supplied from copier 622 (W) × 546 (D) × 117 (H) mm without Tray (FA-A355) Dimensions: 600 (W) ×...
Page 97
Specifications 3 Bin Finisher (FA-F350/F355) Paper Size: A5, A4, A4 R, B4⋅FLS, A3 Paper Weight: 50 – 128 g/m Number of Bins: 3 + Interrupt Tray Bin Capacity: Interrupt Tray 50 sheets 1 Bin 300 sheets 2 Bin 1,000 sheets (See page 60 for detailed information) 3 Bin 200 sheets...
Page 98
Specifications 2 Bin Finisher (FA-F320) Upper Bin: A5, A4, A4 R, B4⋅FLS, A3 Paper Size: Lower Bin: A4 60 – 105 g/m (Upper Bin, without punch: 60 - 130 g/m Paper Weight: Number of Bins: Bin Capacity: Upper 100 sheets Lower 1,000 sheets (When sorting mode: maximum 30 sets and/or 1,000 sheets) Electrical Requirements:...
600 dpi resolution in both copying and printing modes. (Note: 400 dpi for FP-D455/D605 in copying mode.) We hope you find that the wide ranging capabilities of the FP-D355/D355DC/D455/D605 will make your office-place more productive and efficient.
Page 100
CCOLOR “Black”> For Service Call: Matsushita Electric Industrial Co., Ltd. Osaka 542-8588, Japan FFPTD1077 S1000-0 October 2000 Printed in Japan English...