Check Key
Press
to view Speed Dial programming and Feature Key assignments, as well as get other system information.
CHECK
Additionally, pressing
CHECK
is for display only - you cannot edit this information.
Checking Feature Key Assignments
To check a Feature Key assignment:
1. Press
.
CHECK
2. Press a Feature Key on your phone or DDS Console.
a) On your phone, press the key again to check the DSS/BLF assignment.
3. Do one of the following:
a) Press another Feature Key to check.
b) Press
SPEAKER
Checking Personal Speed Dial
Assignments
To check a Personal Speed Dial assignment (keyset only):
1. Press
.
CHECK
2. Press a Personal Speed Dial key, as follows:
a) Press once for the lower-numbered bin name.
For example, pressing key 1 once shows the name for 701.
b) Press twice for the lower-numbered bin number.
For example, pressing key 1 twice shows the number for 701.
c) Press three times for the higher-numbered bin name.
For example, pressing key 1 three times shows the name for 711.
d) Press four times for the higher-numbered bin number.
For example, pressing key 1 four times shows the number for 711.
3. Do one of the following:
a) Press another Personal Speed Dial key to check.
b) Press
SPEAKER
Using the Check Key to get System
Information
To check system information:
1. Press
.
CHECK
2. Follow the chart to check system information.
+
CHECK
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
and a right-column Fixed Feature Key displays important information about your system. This
to exit the check mode.
to exit the check mode.
Check Key System Information
Display
DSX |
Description
http://www.renderx.com/
Features
| 55