TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Flash P.C.B.----------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------5 2.2.
1 Safety Precautions 1.3. Leakage Current Hot Check (See Figure 1.) 1.1. General Guidelines 1. Plug the AC cord directly into the AC outlet. Do not use 1. IMPORTANT SAFETY NOTICE an isolation transformer for this check. There are special components used in this equipment 2.
1.4. How to Discharge the Capacitor on Flash P.C.B. CAUTION: 1. Be sure to discharge the capacitor on FLASH P.C.B.. 2. Be careful of the high voltage circuit on FLASH P.C.B. when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and Remove the necessary parts/unit. 2.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...
2.3. How to Replace the Lithium Battery 2.3.1. Replacement Procedure 1. Remove the MONITOR P.C.B.. (Refer to Disassembly Procedures.) 2. Unsolder the each soldering point of electric lead terminal for Lithium battery (Ref. No. “Z6301” at component side of MONI- TOR P.C.B.) and remove the Lithium battery together with electric lead terminal.
3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2.
3.4. How to Define the Model Suffix (NTSC or PAL model) There are eight kinds of HX-DC2. • a) HX-DC2 (Japan domestic model) • b) HX-DC2PP • c) HX-DC2EB/EC/EF/EG/GN • d) HX-DC2EE • e) HX-DC2GK • f) HX-DC2GT • g) HX-DC2GD •...
5 Location of Controls and Components LCD monitor Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture. It can open up to 90 .
Page 14
16 Lens When not using the unit, be sure to fit the lens cap to protect the lens. Keep the lens cap out of reach of children to prevent swallowing. 17 Speaker 18 Status indicator 19 Internal stereo microphones 20 Built-in flash The flash reaches high temperatures and may cause burns if touched.
6 Service Fixture & Tools 6.1. When Replacing the Main P.C.B. After replacing the MAIN P.C.B. or IC121, be sure to achieve update the Firmware and adjustment. 1. The firmware together with version up procedure are available at "software download" on the "Support Information from NWBG/VDBG-AVC"...
7 Disassembly and Assembly Instructions 7.1. Disassembly Flow Chart This is a disassembling chart. When assembling, perform this chart conversely. 7.2. PCB Location...
7.3. Disassembly Procedure Item Removal Fig. D25 4 Solders Item Removal Mic Holder Unit Side Case L Fig. D1 2 Screws (A) Battery Cover 1 Screw (B) USB Cover Fig. D2 2 Screws (C) Top Cover 2 Screws (D) 2 Lens Holders Side Case L Fig.
Page 18
7.3.1. Removal of the Side Case L, Battery Cover and USB Cover Fig. D1 Fig. D2...
Page 19
Fig. D4 7.3.2. Removal of the Battery Frame Fig. D3 Fig. D5...
Page 20
7.3.3. Removal of the Battery Terminal 7.3.4. Removal of the Heat Sink Left P.C.B. Fig. D6 Fig. D7...
Page 21
7.3.5. Removal of the Flash P.C.B. 7.3.6. Removal of the Battery Terminal Holder Fig. D9 7.3.7. Removal of the Front Case Unit Fig. D8 Fig. D10...
Page 22
7.3.8. Removal of the Lens Unit 7.3.9. Removal of the Main P.C.B. Fig. D12 Fig. D11 Fig. D13...
Page 23
7.3.10. Removal of the Speaker 7.3.11. Removal of the Operation Unit Fig. D15 7.3.12. Removal of the Side Cover R and Grip Cover Fig. D14 Fig. D16...
Page 24
7.3.13. Removal of the LCD Unit Fig. D18 7.3.14. Removal of the LCD Hinge Unit Fig. D19 Fig. D17...
Page 25
Fig. D20 7.3.15. Removal of the LCD Panel Fig. D22 7.3.16. Removal of the Monitor P.C.B. Fig. D21 Fig. D23...
Page 26
Fig. D24 7.3.17. Removal of the Mic Fig. D25...
8 Measurements and Adjustments 8.1. Electric Adjustment • Adjustment method is different from a conventional High definition video camera. • An exclusive jig and PC (including software for adjustment “DSCcal”) are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
Page 28
Note: Remove the Front block of the Lightbox. (Refer to following Fig. for datailes). Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System". *The firmware together with version up procedure are available at "Software download" on the "Support Information from NWBG/VDBG-AVC"...
Page 36
Model No. : HX-DC2 Main(CAA) Schematic Diagram(Main P.C.B.)
Page 37
Model No. : HX-DC2 Main(DMA) Schematic Diagram(Main P.C.B.)
Page 38
Model No. : HX-DC2 Main(PWA) Schematic Diagram(Main P.C.B.)
Page 39
Model No. : HX-DC2 Flash Schematic Diagram(Flash P.C.B.)
Page 40
Model No. : HX-DC2 Monitor Schematic Diagram(Monitor P.C.B.)
Page 41
Model No. : HX-DC2 Main P.C.B. (Component Side)
Page 42
Model No. : HX-DC2 Main P.C.B. (Foil Side)
Page 43
Model No. : HX-DC2 Flash P.C.B. (Component Side)
Page 44
Model No. : HX-DC2 Flash P.C.B. (Foil Side)
Page 45
Model No. : HX-DC2 Monitor P.C.B. (Component Side)
Page 46
Model No. : HX-DC2 Monitor P.C.B. (Foil Side)
Page 47
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C1001 F1G1A1040006 C.CAPACITOR CH 10V 0.1U C1002 F1G1A1040006 C.CAPACITOR CH 10V 0.1U C1003 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C1004 F1G1A1040006 C.CAPACITOR CH 10V 0.1U C1005 F1G1A1040006 C.CAPACITOR CH 10V 0.1U...
Page 48
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C1801 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C1802 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C1803 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C1804 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C1805 F1G0J1050007 C.CAPACITOR CH 6.3V 1U...
Page 49
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9009 F1G0J2240003 C.CAPACITOR CH 6.3V 0.22U C9010 F1H0J1060004 CAPACITOR C9011 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C9012 F1H0J1060004 CAPACITOR C9013 F1G0J1050007 C.CAPACITOR CH 6.3V 1U C9016 F1G0J225A034 CAPACITOR...
Page 50
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q3001 VU3051683703 TRANSISTOR 1 E.S.D. Q3003 VU4052254523 TRANSISTOR 1 E.S.D. Q3004 VU4052254523 TRANSISTOR 1 E.S.D. Q3005 VU3051867301 TRANSISTOR 1 E.S.D. Q5402 VU4052257702 TRANSISTOR 1 E.S.D. R1001 D0GA102JA042 RESISTOR...
Page 51
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R1867 D0GA220JA042 RESISTOR R1868 D0GA222JA042 RESISTOR R1869 D0GA222JA042 RESISTOR R1870 D0GA220JA042 RESISTOR R1875 D0GA103JA042 RESISTOR R3001 D0GA104ZA029 RESISTOR R3002 D0GA104ZA029 RESISTOR R3003 D0GA820JA042 RESISTOR R3004 D0GA104ZA029 RESISTOR...
Page 52
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks RB142 VU9450280710 RESISTOR NETWORKS RB171 VU9450280697 RESISTOR NETWORKS RB172 VU9450280697 RESISTOR NETWORKS RB541 VU9450280703 RESISTOR NETWORKS S3001 K0F111A00547 SWITCH T5401 VU6451011008 TRANSFORMER TH301 VU3080547700 THERMISTOR X1102 H0J480500056...
Page 53
Model No. : HX-DC2 Frame and Casing Section(1)
Page 54
Model No. : HX-DC2 Frame and Casing Section(2)
Page 55
Model No. : HX-DC2 Packing Parts and Accessories Section...
Page 56
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks VU6361561341 SIDE COVER R 1 (-H) VU6361561358 SIDE COVER R 1 (-W) VU6361561365 POWER BUTTON 1 (-H) VU6361561372 POWER BUTTON 1 (-W) VU6361068154 BATTERY COVER RUBBER VU6361561426 GRIP COVER 1 (-H)
Page 57
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks VU6361338363 TAPE VU6361495660 SHEET VQT4D14 OPERATING INSTRUCTIONS 1 PP,PU (English) VQT4D15 OPERATING INSTRUCTIONS 1 PP (French(Canada)) VQT4D16 OPERATING INSTRUCTIONS 1 PU (Spanish) VQT4D29 OPERATING INSTRUCTIONS 1 GT (Chinese(traditional)) VQT4D30 OPERATING INSTRUCTIONS...
Page 58
Model No. : HX-DC2 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks VU4111766909 SCREW VU4111990700 SCREW VU4111766909 SCREW VU4111766909 SCREW VU4111766909 SCREW VU4111755705 SCREW VU4111766909 SCREW VU4111755705 SCREW VU4111766909 SCREW VU4111990908 SCREW VU4111990908 SCREW VU4111786204 SCREW VU4111786204 SCREW VU4111840005...