Advertisement
EnGliSh
10
1
Fill the water tank up to the MAX level.
2
Turn the cap of the drainage opening to the 'unlocked' position.
3
Tilt the appliance to an angle of approx. 45° and empty the water tank into the sink. Make
sure there is no more water flowing out of the drainage hole.
4
Repeat steps 1, 2 and 3.
5
Turn the cap of the drainage opening to the 'locked' position.
Replacement
You can order the following items from a Philips service centre:
-
steamer head holder
-
filling cup
-
glove
-
hanging accessory
Environment
-
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 22).
Guarantee and service
If you need service or information or if you have a problem, please visit the Philips website at www.
philips.com or contact the Philips Consumer Care Centre in your country. You find its phone
number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem
The appliance does
not heat up.
The appliance does
not produce any
steam.
Possible cause
There is a connection problem.
You have not switched on the
appliance.
The steamer has not heated up
sufficiently.
Steam has condensed in the hose. Lift the steamer head to straighten
The water level is below the MIN
level indication.
Solution
Check the mains plug and the wall
socket.
Press the on/off button to switch on
the appliance.
Let the appliance heat up for approx.
2 minutes.
the hose. This allows any
condensation to flow back into the
water tank.
Fill water tank to the MAX level
indication.
Advertisement
