Nokia 6710 Navigator Service Manual page 13

7) Carefully release the two clips with the SS-93.
Insert the SS-93 between the upper and lower block
and lift the upper block slightly. Be careful with the
components underneath.
9) The upper block can now be separated.
11) To disconnect the CONNECTING FLEX, first open
the locking mechanism of the connector with the
SS-93. Then separate the flex. Be careful not to
damage the connector.
13
8) Use the SS-93 to disconnect the MAIN FLEX from
the engine board. While opening the connector, be
careful to not to damage it!
10) Use the SS-93 to disconnect the CONNECTING
FLEX from the engine board. Be careful with the
components around the connector! Then separate
the UI BOARD ASSEMBLY.
12) Detach the ALPHA DOMESHEET with the dental
tool. Be aware of the sharp point of the dental tool -
be careful to not to injure yourself. The ALPHA
KEYMAT ADHESIVE and the ALPHA DOMESHEET cannot
be reused.
Confidential  Copyright © 2009 NOKIA  All rights reserved
Nokia 6710 Navigator RM-491
Service Manual Level 1&2
Version 1.0 ISSUE 1