Connecting To Other Equipment; Connections - Frontside Of Your Dvd Recorder; Camcorder Connection - Philips DVDR1000 Instructions For Use Manual

Connecting to other equipment

Use the top connector (EXT 2) on your DVD
SCART
recorder to make connections to a:
- Satellite receiver or Set top box,
- VCR,
- DVD Video player
Most pre-recorded video cassettes and DVD discs are
copy protected. If you try to copy them the display
shows 'COPY PROTECT'.
For installation of a decoder, see 'User Preferences' -
'Installation'.
TV
1 3
4
EXT 4 EXT 3
Set top box
Note:
If the power is off or Low Power Standby is selected (see
User Preferences - features), the signal from EXT 2 will not
be passed on to the TV set on EXT 1.
10 INSTALLATION
2
5
AUX- I/0
EXT 2
TO TV I/0
EXT 1
Connections - frontside of your
DVD recorder

Camcorder connection

If you have a DV or Digital 8 camcorder, connect
the i-link DV input socket (1) to the corresponding
output socket on the camcorder using the i-link
cable of your camcorder.
If you have a Hi-8 or S-VHS(C) camcorder, connect
the S-video input socket to the corresponding
output socket on the camcorder, using the S-video
cable supplied (2) and connect the audio cable (4)
supplied.
Otherwise connect the Video input socket (yellow)
to the corresponding output socket on the
camcorder using the video cable supplied (3) and
connect the audio Left (white) and Right (red) input
sockets to the corresponding sockets on the
camcorder using the audio cable supplied (4).
1 2
Camcorder
Camcorder
PANEL
3 4