SOLD BY laptopia2005 DO NOT RESELL!!
1-8
HARDWARE OVERVIEW—REAR
Review the following section for a description of the hardware on the rear of the NEC
Versa.
Infrared Port
This port lets you transfer files between your NEC Versa and an IR-equipped desktop or
notebook computer. You can also print to an IR-equipped printer without using cables.
Keyboard/Mouse Port
Use the standard PS/2 port to connect an external PS/2-style mouse or a PS/2-style key-
board to the system. A serial mouse is not supported through this connector nor is a Y-
adapter.
Expansion Port
This port provides a connection for NEC Versa options including the NEC Versa Port Rep-
licator 2600.
Monitor (Video) Port
Use this 15-pin port to attach an external monitor to your NEC Versa. You can run the
LCD display and the external monitor simultaneously or run either alone.
Parallel Port (LPT1)
The 25-pin printer port provides a parallel interface to which you can connect a parallel
printer or pocket network adapter. Use this port to connect a parallel printer or other par-
allel device. The port is IEEE 1284 compatible. It supports bi-directional (AT) mode, En-
hanced Capabilities Port (ECP) mode, Enhanced Parallel Port (EPP) mode, (365SL-
compatible), and bi-directional (PS/2) mode.
Technical Information
Figure Section 1-7 Rear Features
SOLD BY laptopia2005 DO NOT RESELL!!
Port
Replicator Latch
IR Port
Keyboard
Mouse Port
Expansion
Port
Monitor
Port
AC Power
Port
Serial
Port
Parallel
Port