Step 1: Check the Modem Hardware
Your HP Fax Modem includes a diagnostics utility. You can
use this utility to ensure that your modem hardware is
functioning correctly. The diagnostics utility also checks the
phone line connection, including dial tone detection.
To run the diagnostics utility:
1 Insert floppy Disk 1 containing the Modem Diagnostics into
the disk drive.
2 Restart your computer. To do this, click
, then select
down
3 Your computer will start (boot) on the floppy disk. Run the
diagnostics utility by typing "
the
key. The diagnostics utility checks the modem
Enter
hardware and then displays the result.
If your computer does not start on the floppy disk, check
that your computer is configured to boot on the floppy
disk. To do this, enter the PC's Setup program by pressing
during startup and check the boot parameters.
F2
Restart the computer
DIAG_HW.BAT
Troubleshooting
Step 1: Check the Modem Hardware
Start
Shut
and click
" and pressing
English
.
OK
35