Regulatory Standards - Acer ALN-325 Series User Manual

Symptoms 1
LNK LED indicator doesn't light after host PC is powered on
Possible Causes
Cabling connection problem
Suggestions
1. Check for loose cabling
2. Check for wrong pin assignments on the UTP cable
3. check the network condition
Symptoms 2
Adapter failure; cannot log into the network
Possible Causes
1. Bad cable connection
2. Host PC slot defective
Suggestions
1. Check cabling for loose connection or wrong pin assignments on
the cable.
2. Check if the adapter is properly seated onto the computer slot.
3. Install the adapter in another PC, or install it on another slot. If
the problem is eliminated, then the original PC slot is defective.
Contact your PC vendor for assistance.

Regulatory Standards

6