GE TV User Manual page 5

Quick Guide to Your TV
Startup
5
. Adjust PICTURE TILT.
Picture tilt is used to correct a tilted
picture from the effect of the Earth's
magnetic field on a large picture
tube. The PICTURE TILT
STRENGTH and POLARITY
switches on the back of the TV
compensate for this effect. If the
picture appears tilted, follow these
steps to improve it.
You may need to reset the switches
if the TV is moved or repositioned
in the room.
6
. Place all available
channels in memory
(Autoprogram)
Details for adding and deleting
channels are on page 20.
7
. Set the Time
BACK OF TV
OFF
LOW
+ –
POLARITY
STRENGTH
PICTURE TILT
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
12:21 AM
Controls Alarm Adjust Setup
Alarm: Off
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: Use –/+ to set time.
A. Make sure STRENGTH switch
is in the OFF position.
B. Move STRENGTH switch to the
LOW position. If this does not
HIGH
fully improve tilt, move
STRENGTH switch to HIGH.
This should correct tilt. If
moving STRENGTH switch
makes tilt worse, return it to
OFF and go to the next step.
C. Change the position of
POLARITY switch. If this
improves the tilt but does not
fully improve it, move the
STRENGTH switch to LOW or
HIGH. This should correct tilt.
A. Press MENU•PROG until the
13
Setup menu is selected. This
menu is white.
B. Press MOVE
Autoprogram.
C. Press MOVE
clear
channels in the TV's memory.
D. Wait until TV has cycled
through all the channels and
returns to original channel.
A. Press MENU•PROG until the
13
Alarm menu is selected. This
menu is green.
B. The Clock is automatically
highlighted the first time you
set it. If it is not, press MOVE
to highlight it.
C. Press MOVE
D. Press MOVE
to highlight
to start placing
to set the hour.
to set the minutes.
3