• Make sure to remove all packaging and • Do not use the appliance for professional transport bolts. use. The appliance is only for domestic use. • Make sure that the mains plug is disconnec- ted from the mains socket during installation. www.zanussi.com...
• To use the correct quantity of the detergent, please contact your local council, your check the water hardness of your domestic household waste disposal service or the shop system where you purchased the product. Packaging materials Recycle the materials with the symbol www.zanussi.com...
Water supply Maximum load Cotton 5 kg Spin speed Maximum 1000 rpm (ZWS 3101) 1200 rpm (ZWS 3121) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Product description Worktop Feet for the appliance level...
Control panel Programme knob Intensive button Start button Prewash button Display Spin button Easy iron button Delay Star button Extra rinse button Programme knob Start/Pause button Turn this knob to set a programme. Press this button to start a programme. www.zanussi.com...
Page 6
Press this button to add rinsing phases to a knob to activate again the light display. programme. Use this function for persons allergic to deter- gents and in areas where the water is soft. Intensive button Press this button to increase the intensity of the washing phase. www.zanussi.com...
It is possi- Rinses Cпорт ble to wash casual, sport or quilted Spin phase at 800 rpm 40° C items. Set this programme and the easy iron function not to iron the laundry. max. 2.5 kg www.zanussi.com...
To cancel the programme that it operates or to deactivate the appliance. 1) Refer to this programme for the energy label values with a maximum load of cotton at the maximum spin speed. It agrees with the EEC 92/75 standards. www.zanussi.com...
• Do not wash in the appliance : ture and the level of soil. – Laundry without hems or with cuts • If you use liquid detergents, do not set the – Underwired bras. prewash phase. – Use a washing bag to wash small items. www.zanussi.com...
4. Use the correct quantity of detergent and them in the appliance. Make sure not to additives. put too much laundry in the drum. 5. Set and start the correct programme for 3. Close the door. the type of laundry and soil. www.zanussi.com...
Page 11
Cancel a programme Always obey the instructions that you find 1. Turn the programme knob to to cancel on the packaging of the detergent prod- the programme and to deactivate the appli- ucts. ance. www.zanussi.com...
Care and cleaning External cleaning Warning! Clean the appliance only with soap and warm Disconnect the appliance from the mains sup- water. Fully dry all the surfaces. ply before you clean it. Caution! Do not use alcohol, solvents or chemical products. www.zanussi.com...
Page 13
2. Do not remove the filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water Detergent dispenser must be cold before you clean the drain pump. To clean the dispenser: To clean the drain pump: www.zanussi.com...
Page 14
To clean the filter: • Close the water tap. 6. Remove fluff and objects from the • Remove the inlet hose behind the appli- pump. ance. • Clean the filter in the valve with a stiff brush or a towel. www.zanussi.com...
Put in the mains plug. start. in the mains socket. The fuse in the box fuse is dam- Replace the fuse. age. The appliance door is open. Close the door firmly. You do not press the start button Press the start button. www.zanussi.com...
Page 16
The appliance makes an Incorrect level of the appliance. Adjust the level of the appliance. Refer to unusual noise. 'Installation'. You did not remove the packag- Remove the packaging and/or the transit ing and/or the transit bolts. bolts. Refer to 'Installation'. www.zanussi.com...
Page 17
Refer to the information supplied with this ap- the information here: pliance for guarantee condition and point of contact. The information to give to the service is Model ....on the rating plate. Product number 914..... Serial number ....(S.N.) www.zanussi.com...
5. Put the front piece on the floor behind the appliance. Carefully put down the ap- pliance with the rear side on it. Make sure not to damage the hoses. 2. Remove the polystyrene packaging mate- rials. 3. Remove the internal film. www.zanussi.com...
Page 19
Warning! Remove all the packaging and the transit bolts before you install the appliance. We recommend that you keep the packag- ing and the transit bolts for when you move the appliance. www.zanussi.com...
Page 20
There are different procedures to connect the drain hose: With the plastic hose guide • The appliance must be level and stable. Caution! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. www.zanussi.com...
Page 21
60 cm and not more than 90 cm. The end of the drain hose must always be ventilated , i.e. the in- ner diameter of the drainpipe must be larg- er than the external diameter of the drain hose. www.zanussi.com...