Table of Contents
Advertisement
Phone
You are connected to the telephone line - your handset is off hook.
Time
Displays the time.
Date/month
Displays the date and month.
Caller display record
Shows the position in the caller display list of the caller display record being received
or viewed.
New
Appears when viewing new caller display records.
Message
Appears when viewing a caller display entry where an answering machine message
was recorded.
Mute
Flashes when you press the mute button to mute the microphone.
Speakerphone
Appears when the handsfree function is turned on.
Indicates the total number of answering machine messages recorded (XX from 00 to
XX
MESSAGES
59) and the total number of caller display records saved (YY from 00 to 99)
YY
CALLS
Flashing alternately with the screen above, indicates the number of new answering
XX
NEW
machine messages recorded and the number of new caller display records received.
YY
NEW
6
INSTALLATION
1. Locating the base unit (see P3 and P4).
The base unit should be placed on a level surface, in a position where:
The mains adapter plug will reach an easily accessible 230-V AC switched mains supply socket -
never try to lengthen the mains power cable.
The telephone line cable will reach your telephone line socket or extension socket.
It is not close to a sink, bath or shower, or anywhere else where it might get wet.
It is not close to other electrical equipment - fridges, washing machines, microwave ovens, TVs,
fluorescent lights, etc.
2. Plug the coiled handset cord into the handset. Plug the other end into the jack on the side of the
base unit.
3. Place the handset on the base unit.
4. Plug the telephone line cord into the phone line jack at the back of the base unit. Plug the other
end into your telephone line socket or extension socket.
5. Plug the power supply cord into the power jack at the back of the base unit. Plug the other end
into a 230 V AC, 50 Hz mains socket
5
Advertisement
Table of Contents
