Acer AT1916D User Manual page 19

Using Composite (AV) Video
Connecting your DVD Player
1. Turn off the TV and DVD player.
2. Connect the Video (yellow colour)
connector on your DVD player to the Video
(yellow colour) connector in the AV group.
3. Connect the R (red colour) and L (white
colour) audio connectors on your DVD
player to the corresponding R (red
colour) and L (white colour) audio input
connectors in the AV group.
4. Turn on the TV and DVD Player.
5. Select AV using the SOURCE button on
the remote, side of the TV or directly by
pressing the VIDEO button on the Remote
Control.
Using SCART
Connecting Your VCR or Video Camera
1. Turn off the TV and VCR or Video Camera.
2. Connect the SCART socket of your VCR
or Video Camera to the SCART socket of
the TV.
3. Turn on the TV and VCR or Video Camera.
4. Select AV using the SOURCE button on
the remote, side of the TV or directly by
pressing the VIDEO button on the Remote
Control.
NOTE
 Refer to your VCR or Video Camera user
manual for more information about the
video output requirements of the product.
Connecting to a PC
1. Turn off the TV and PC.
2. Connect a 15-pin D-Sub RGB (VGA) cable
to the RGB output of your PC and the
other end to the VGA input at the rear of
the TV.
3. Connect the Audio Out on your computer to
the AUDIO input at the rear of the TV.
4. Turn on the TV and PC.
5. Select VGA using the SOURCE button on
the remote, side of the TV or directly by
pressing the PC button on the Remote.
NOTE
 For the best picture quality when
connecting a computer through VGA, set
your computer timing mode to native
resolution of panel. Please refer to the PC
or graphic card's user guide for additional
information on how to set the timing
mode and the video output requirements
of the product.
18