Camp-On Calls - Toshiba Perception e&ex User Manual

DIGITAL TELEPHONE
Terminate the Existing Call:
1. Hang up.
To Accept the Waiting Call While
Holding the Existing Call:
1. Press the CWT button, or
press the CONF/TRNS
and dial the access code
_____.
To Return to the Original Call:
1. Press the appropriate
button.
To Disconnect One Call and
Remain Connected to the Other
Call:
1. Hang up while connected to
the call that you want to
terminate.
2. Press the DN button.
To Accept a Camp-on Call:
1. Complete the original call and
hang up.
2. Answer the new call.
20
The CWT LED will go off, and the new call will ring your prime DN in the
usual manner.
button
The CWT LED will light steadily, the DN LED will indicate the On-hold
(# 4)
status, and you will be connected to the waiting call.
DN
The CWT LED will flash, and the DN LED will indicate the In-use status.
NOTE: It is possible to alternate between the two calls indefinitely by
selecting either the
The remaining call will appear in the hold condition at the
You will be connected to the remaining call.
NOTE: Camp-on and Call Waiting are mutually exclusive.

CAMP-ON CALLS

A short warning tone from your telephone's speaker (while you are
talking with someone) advises you that an incoming call has been parked
at your station.
Your telephone will ring, and the DN LED will flash.
CWT button or the DN button.
PERCEPTION e
ex
&
DN button.