Table of Contents
Advertisement
To install LiveWare™ manager using a barcode scanner
1
From your phone's main application screen, find and tap your barcode scanning
application, for example, NeoReader™.
2
To scan the barcode, position the complete barcode inside the viewfinder.
3
After the scanner recognises the barcode, tap Continue. You are directed to the
LiveWare™ manager application in Android Market™. Follow the instructions that
appear on your phone screen to download and install LiveWare™ manager.
The procedure described above can vary depending on the scanning software you download.
Pairing SmartWatch
After you install LiveWare™ manager, you are ready to pair your SmartWatch device with
your phone. SmartWatch can only be paired with one phone at a time.
To pair SmartWatch with your phone
1
Turn on the Bluetooth™ function in your phone.
2
Turn off SmartWatch if it is not already turned off.
3
Press and hold down the power key
automatically enters pairing mode.
4
Place your phone close to your SmartWatch.
5
Go to the Bluetooth™ devices list in the Bluetooth settings of your phone. Tap
SmartWatch.
6
Follow the instructions in your Sony and/or Sony Ericsson branded Android™
mobile phone. For the phones of other brands, enter '0000' if you are asked to
enter a passcode.
7
Tap
on your SmartWatch, then tap Pair on your phone.
If pairing fails, the SmartWatch device switches off and you need to restart and enter pairing
mode again.
Once you have paired your phone with the SmartWatch device, your phone will remember this
pairing. You do not need to re-enter the passcode the next time you connect to a paired
SmartWatch device.
Installing the SmartWatch application
The SmartWatch application handles the connection between your SmartWatch device
and your phone. Use this application to change settings for SmartWatch, and to
download applications from Android Market™.
This is an Internet version of this publication. © Print only for private use.
to restart SmartWatch. The device
5
Advertisement
Table of Contents
