Initial Configuration - Cisco ASR 5000 Series Administration Manual

HSGW Configuration
Step 1
Set system configuration parameters such as activating PSCs by applying the example configurations found in the
System Administration Guide.
Step 2
Set initial configuration parameters such as creating contexts and services by applying the example configurations
found in the

Initial Configuration

Step 3
Configure the system to perform as an HSGW and set basic parameters such as interfaces and an IP route by applying
the example configurations presented in the
Step 4
Create a AAA context and configure parameters for AAA and policy by applying the example configuration in the
AAA and Policy Configuration
Step 5
Optionally configure a Robust Header Compression (RoHC) profile by following the steps found in the
Header Compression Configuration
Step 6 Verify and save the configuration by following the instruction in the
Initial Configuration
Step 1
Set local system management parameters by applying the example configuration in the
section.
Step 2 Create the context where the HSGW service will reside by applying the example configuration in the
Configuring an HSGW Context
Step 3
Specify static IP routes to the eAN/ePCF and/or PDN gateway by applying the example configuration in the
Configuring Static IP Routes
Step 4
Create an HSGW service within the newly created HSGW context by applying the example configuration in the
Creating an HSGW Service
Step 5
Create the context where the MAG service will reside by applying the example configuration in the
Configuring MAG Context
Step 6
Create a MAG service within the newly created MAG context by applying the example configuration in the
MAG Service section.
Modifying the Local Context
Use the following example to set the default subscriber and configure remote access capability in the local context:
OL-22984-01
section of this chapter.
HSGW and MAG Service Configuration
section.
section.
section.
section.
section.
section.
Configuring the System to Perform as a Standalone HSGW ▀
Verifying and Saving the Configuration
Cisco ASR 5000 Series HRPD Serving Gateway Administration Guide ▄
section.
Optional
section.
Modifying the Local Context
Creating and
Creating and
Creating a