Download Print this page
Hide thumbs Also See for DWL-3200AP:

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for D-Link DWL-3200AP

  • Page 2: System Requirements

    • Installed Ethernet Adapter Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above ™ Package Contents Power over Ethernet D-Link AirPremier DWL-3200AP ™ base unit Managed Wireless Access Point Power Cord CD-ROM with Manual Ethernet Cable Power Adapter-DC 48V, 0.4A...
  • Page 3: Installing The Hardware

    Installing the Hardware Connect one end of an Etherne cable (included with your Step 1 package) to the LAN port on the DWL-300AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit. Step 2 Connect another Ethernet cable from the DATA IN port on the PoE base unit to your router/switch or...
  • Page 4 Mounting Plate Assembly Installing the Hardware DWL-300AP Install Guide Step 1: Insert provided wall anchors in the wall where the mounting plate will be at- tached. Step 2: Use the provided screws to secure the mounting plate on the wall. DWL-300AP Install Guide...
  • Page 5 Step 3: Attach the remaining screws securely to the back of the DWL-300AP. Step 4: Attach the DWL-300AP to the mounting plate. DWL-300AP Install Guide...
  • Page 6 Installing the Hardware DWL-300AP Install Guide Step 5: Slide the DWL-300AP down into the grooves on the mounting plate to secure it to the plate. DWL-300AP Install Guide...
  • Page 7 Your Setup is Complete When you have completed the steps in this Installation Guide and configured your DWL-300AP for your network, your network should look similar to this: DWL-300AP Install Guide...
  • Page 8: Technical Support

    ©00-007 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. All references to speed are for comparison purposes only. Maximum wireless signal rate derived from IEEE Standard 80.11g specifications.