Table of Contents
Advertisement
CAm TITle : If you enter a title, the title will appear on the monitor.
1 If the SPECIAL menu scr
that the arrow indicates 'CAM TITLE'.
2
Set it to 'ON' by using the Function
Setup switch.
3 Press the Function Setup switch.
4
Use the Function Setup switch to move to a
desired letter and select the letter by pressing
the switch. Repeat this to enter multiple letters.
You can enter up to 15 letters. Move the
cursor to
for entering a space, then press
↑
the Function Setup switch, the cursor will skip
to the next.
5 Enter a title, move the cursor to 'POS' and press
the Function Setup switch. The entered title appears
on the screen. Select the position to display the title
on the screen by using the Function Setup switch
and press. When the position is determined, select
'END' and press the Function Setup switch to
return to the SPECIAL menu.
W hen the CAM TITLE menu is 'OFF', no title will be displayed
if you enter one.
O nly English is available in this mode.
I f you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
Function Setup switch. Move the cursor over the letter to be edited, move the cursor to
the letter to be inserted and then press the Function Setup switch.
een is displayed, use the Function Setup switch so
CAMERA TITLE SETUP
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- .
0 1 2 3 4 5 6 7 8 9
/
← → C L R P O S E N D
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
FRONT DOOR
on the monitor screen even
English_25
Advertisement
Table of Contents
