2
Getting Started
Out of the Box
Verify that the carton contains the following items:
• Dolphin 70e Black mobile computer (terminal)
• 3.7V Li-ion rechargeable battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Quick start guide
• Compliance Regulatory Sheet
If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to
keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
Note: Your Dolphin model may differ from the model illustrated in this guide; however, the features noted are
standard for all Dolphin 70e Black models with Windows® Embedded Handheld unless otherwise indicated.
Initial Setup for Dolphin 70e Black Terminals
Step 1. Install the Battery
Note: Before installing the main battery, read the
The terminal is shipped with the battery packaged separate from the unit. To install the battery, first
identify your model type, then follow the installation steps on the pages indicated below.
Identifying Your Model Type
Dolphin 70e Black model terminals equipped with a battery door lock are designed for use with
battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour) and BAT-EXTENDED-02
(Li-ion 3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. See page
installation instructions.
Back panel of the terminal
with standard battery door
shown.
Dolphin 70e Black model terminals not equipped with a battery door lock are designed for use with
battery part numbers BAT-STANDARD-01 (Li-ion 3.7V, 6.179 watt hour) and BAT-EXTENDED-01
(Li-ion 3.7V, 12.358 watt hour) manufactured for Honeywell International Inc. See page
installation instructions.
Back panel of the terminal
with standard battery door
shown.
Guidelines for Battery Pack Use and Disposal
on page 3-15.
2-2
for battery
Battery Door Lock
2-3
for battery
2 - 1