Panasonic DMP-BD80 Operating Instructions Manual page 13

Multi channel speakers
•
e
Connecting to 5.1ch AUDIO OUT terminal
rBD80~
e"Analog Audio Output" should be set to "2ch
(Oownmix) + 5.1ch". (~34)
e Enjoying High Bit rate Audio of BO-Video
(~ 8)
e Using this connection, 7.1 channel surround
is mixed down to 5.1 channel audio.
eWhen connecting amplifier/receiver or other
devices with HOM I AV OUT terminal, set
"HOMI Audio Output" to "Off'. (~ 34)
(Otherwise, depending on the specifications
of connected devices, the audio from AUOIO
OUT terminal may be output as two channels
only.)
eWhen connecting a TV
(~
11,0) with HOMI
AV OUT terminal, set "HOMI Audio Output" to
"Off'.
(~
34)
(Otherwise, the sound may not be output with
the desired audio.)
• Depending en
ho\~.'
the disc was recorded, the
audio may not be output properly on the
number of channels desired.
Cable connections
C)
Front speaker (L/R)
o
Surround speaker (LlR)
G
Center speaker
G
Subwoofer
]
Amplifier/receiver
FRONT
SURROUND SUBWOOFER
5.1ch
Back of the unit
-==i==~~iiiiii~~~i~==r~~f.~
Connect Audio
- cables to
----,.. . . .t> terminals
corresponding to
the speakers you
have connected.
«D
Connecting to 2ch AUDIO OUT terminal e"Analog Audio Output" should be set to "2ch
(Oownmix) + 5.1ch". (~34)
e Using the two analog audio channels this
connection provides, you will not be able to
use any surround sound audio modes. t ]
Amplifier/receiver
OR
_---l~::::::~ AudioNideo cable (included)
Back of the unit
AC power connection
Back of the unit
Cooling fan
I
AC
pow"
,",,1, '''d ('""od'd)
-=i-
To a household AC outlet - .
(AC 120 V, 60 Hz) . . .
e For best results this unit should be connected
directly to an AC outlet.
eThis unit consumes a small amount of AC
power ("Quick Start": "Off', less than 0.5 W)
even when turned off. In the interest of power
conservation, if you will not be using this unit
for an extended period of time, it can be
disconnected.