Table of Contents
Advertisement
Connecting for 10Mbps Ethernet
Category 3, Category 4, and Category 5 UTP cable, as well as EIA/TIA - 568 100-ohm
STP cable, all qualify under traditional Ethernet cabling rules. The maximum cable run
between the DFE-680TX and the supporting hub is 300 ft. The cable must be "straight"
(not a " crossover" cable) with RJ-45 plug at each end. Make the network connection by
plugging one end of the cable into the RJ-45 receptacle of the media coupler, and the
other end into a port of the supporting hub.
12
Advertisement
Table of Contents
