Advanced; Digital Input/Output - D-Link DCS-2136L User Manual

Wireless ac day/night camera with color night vision

Hide thumbs Also See for DCS-2136L:

Table of Contents

Section 4: Configuration

This screen allows you to control the behavior of digital input and digital

output devices. The I/O connector provides the physical interface for

digital output (DO) and digital input (DI) that is used for connecting a

variety of external alarm devices such as IR-Sensors and alarm relays.

The digital input is used for connecting external alarm devices and once

triggered images will be taken and e-mailed. After making any changes,

click the Save Settings button to save your changes.

Select D/I or

The camera will send a signal when an event is triggered,

D/O Mode:

depending upon the type of device connected to the DI

circuit.

N.C. stands for Normally Closed. This means that the

normal state of the circuit is closed. Therefore events

are triggered when the device status changes to "Open."

N.O. stands for Normally Open. This means that the

normal state of the circuit is open. Therefore events are

triggered when the device status changes to "Closed."

D-Link DCS-2136L User Manual

Advanced

Table of Contents