Battery Charger; Usb Fdd Kit; Slim Port Replicator; Ports - Toshiba 2000 User Manual

Battery Charger

The battery charger (PA3091U) lets you charge a High Capacity 2nd Battery Pack
(PA3155U) outside the computer.

USB FDD Kit

The 3 1/2" external diskette drive module can be connected to the USB port. For
details on connecting the 3 1/2" external diskette drive module, refer to Chapter 4,
Operating Basics.

Slim Port Replicator

In addition to the ports available on the computer, the Slim Port Replicator provides,
an external monitor port, four USB ports, a port for charging a High Capacity 2nd
Battery Pack, a LAN jack and a DC-IN socket. The Slim Port Replicator connects
directly to the docking interface on the bottom of the computer. The AC adaptor
connects the Slim Port Replicator to a power source.
CAUTION: The computer must be configured properly before connecting
to a LAN. Logging onto a LAN using the computer's default settings
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.

Ports

The following ports and accessories are available on the Slim Port Replicator.
One RJ45 LAN jack
External monitor port
DC IN socket
Universal Serial Bus (four) ports
Port to charge a High Capacity 2nd Battery Pack
Slim Port Replicator
8-11