Power Distribution Units (2U); Figure 1.40 Power Distribution Unit For Dx100 S3/Dx200 S3 (Ac200-240V, 2U, 12Outlets); Figure 1.41 Power Distribution Unit For Dx100 S3/Dx200 S3 (Ac200-240V, 2U, 16Outlets) - Fujitsu ETERNUS DX100 S3 Operation Manual

Chapter 1 Component Name/LED Name
1.4 Power Distribution Units (for Regions Other than EMEA&I)
1.4.2

Power Distribution Units (2U)

2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
■
Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 12Outlets)
There are 12 outlets.

Figure 1.40 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 12Outlets)

1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
■
Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 16Outlets)
There are 16 outlets.

Figure 1.41 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 16Outlets)

1. Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
1
2
1
2
42
Copyright 2014 FUJITSU LIMITED
P3AM-7662-04ENZ0