The layout of your NRX EVO 250 Ringer/MWI Indicator Wall Mount Tab Memory Buttons Number Keypad 90V MWI Headset Mic Tone Button HEADSET MIC TX Volume TX VOLUME Program Button HICOM SENS. LOW / HIGH Recall Button HICOM Redial/ PQRS...
2. When you hear the dial tone, press one of the 2.4 Programming Memory Buttons memory location buttons for dialling from that memory. There are 3 memory buttons on the NRX EVO 250, which can be used to store your frequently used or Privacy (Muting the Microphone during Conversation) important telephone numbers.
Ring Indicator Lamp on the unit that will flash when the telephone is ringing as a visual indication. The NRX EVO 250 has a Recall facility which is used to The Ringer Switch does not control this Ring Indicator Lamp.
During a headset (handsfree) conversation, lifting the handset will switch the unit to the handset mode. The NRX EVO 250 is fitted with a headset stand socket The headset will be disabled and the handset should at the back of the telephone. An optional NRX EVO be used for conversation instead.
4) Discontinued models under warranty will be replaced with a similar or more featured telephone. Polaris Communications have built the NRX EVO 250 5) We reserve the right to charge for items telephone to a high standard. Our warranty reflects our belief that during it’s working life you should not...
Faulty units should be returned to our service centre at the following address, SERVICE CENTRE 393 Flemington Road North Melbourne VIC 3051 AUSTRALIA Polaris Communication’s full liability will extend to the cost of repair or complete replacement of the returned item only.