Remote Controller - Electrolux SBB800S-1 Installation Manual

Remote Controller

Installation Guide
Note
Do not connect power to the water heater before the remote controller has been properly installed.
Recommended installation location of the remote controller is in a bathroom.
Included Parts List
Part Name
Remote Controller
Wall Packing
Phillips Roundhead Wood Screw
Wall Anchor
Do not disassemble the remote controller.
Notes on the Installation Location
accessible location.
Avoid installing in a place where water or steam
can come into contact with the controller.
(e.g., benzene, fatty and oily detergents) are
used.
an indoor location where it will be exposed
to direct sunlight.
38
Wall Packing
Quantity
1
1
2
2
Remote Controller
Connection of Remote Controller Cord
White Connector
(two-core)
* Con rm the connection with the labels at
both ends of the remote controller cord.
The remote controller cord can be extended
up to 300 ft (90m). by splicing the cord and
using 18 gauge wire to extend the cord to
the appropriate length.
For Installers:
Read this installation guide
carefully before carrying out
installation.
Electrolux Home Products, Inc.
Connecting Wire
Phillips Roundhead
Wood Screw
To Remote Controller
Wall Anchor