Selecting Action Taken - HP ProCurve NAC 800 User Manual

NOTE:
NOTE:
TIP:
2. Select the test failure actions to apply for this test:
Send email notification
•
Quarantine access
•
3. Select any test properties if applicable.
4. Click ok.

Selecting Action Taken

Actions can be passive (send an email), active (quarantine) or a combination
of both.
To select the action to take:
Home window>>NAC policies>>Select a NAC Policy>>Tests menu option
1. Click on the name of test to display the test's options.
Click a test name to display the options; select the test check box to enable
the test for the policy you are modifying.
2. Select one of the following when an endpoint fails this test:
• Send an email notification – Sends an email to the email address
specified (see "Notifications" on page 3-117).
An email is sent for each retest.
• Quarantine access – Specify when the endpoint should be denied
access.
– immediately
– grant temporary access
If you select a temporary access period here, the end-users are
allowed temporary access for the specified time, after which they
are denied access until they pass the test. The temporary access
period allowed is shown on the end-user results window (see
"End-user Access" on page 5-1).
The minimum amount of time you can grant temporary access is 10 minutes.
3. To use a patch manager:
NAC Policies
NAC Policy Tasks
6-17