Clock And Alarm Functions; Set The Date And Time; Select Hour Format; Auto Update Time - Silvercrest COCOON M1450 TWIN User Manual

Cocoon M1450 TWIN
LCD Contrast:
Time Format:
Handset Name:
Phone Book:
Calls list:
Redial list:
Auto Answer:
To restore the default settings:
1. Press the recall key R 4 and hold for approximately 10 seconds until
'Handset Reset?' is displayed.
2. Press
2
5

Clock and alarm functions

5.1

Set the date and time

Info
1. Press 2
2. Press or
3
3. Press
2
4. Press or
3
5. Press
2
6. Enter the last two digits of the year and press 'Save' 2 .
7. Enter two digits for the month and press 'Save' 2 .
8. Enter the day and press 'Save' 2 .
9. Enter the hour and press 'Save' 2 .
10. Enter the minutes and press 'Save' 2 .
Important
5.2

Select hour format

1. Press 2
2. Press 3 or
3. Press
2
4. Press 3 or
5. Press
2
6. Select the time format (12 hour or 24 hour display) and press
5.3

Auto update time

Normally the time and day/month is updated by the network. If you want to disable this
function:
1. Press 2
6
24 hour
Handset
Empty
Empty
Empty
Off
to confirm or
If you have Caller ID (CLIP) on your telephone line and the provider
sends date and time, your clock will be set automatically on an
incoming call unless you have turned this function off (see "5.3 Auto
update time"). The year is not set automatically.
Once you have set the time on one handset this will be transferred to
all the handsets automatically.
.
repeatedly, select 'Time'.
11
to confirm.
repeatedly, select 'Date and Time'.
11
to confirm.
The date and time are lost if there is a power failure at the base unit.
.
repeatedly, select 'Time'.
11
to confirm.
11 repeatedly, select 'Set Time Format'.
to confirm.
.
Clock and alarm functions
14 to cancel or quit the menu without resetting.
.
2
23