User Settings; Escalert; Set Squelch Level; Set Power Level - Motorola CP140 User Manual

USER SETTINGS

You can enable/disable some of your radio features
using the programmable buttons pre-programmed
by your dealer.

ESCALERT

Your radio can be programmed to increase the
volume of the alarm tones when a radio call is not
answered.
Press the preprogrammed Escalert button to toggle
between On and Off.

SET SQUELCH LEVEL

Use this feature to filter out (unwanted) calls and/or
background noise. However, tightening squelch
could cause calls from remote locations to be
filtered out as well. In this case, normal squelch may
be more desirable.
Press the preprogrammed Squelch button to toggle
between tight and normal squelch.

SET POWER LEVEL

Each channel in your radio has a predefined
transmit power level that can be changed.
High power allows you to reach a radio that is
•
farther away.
• Low power to conserve the battery.
To set the power level, press the preprogrammed
Power Level button to toggle between low and high
power.

OPTION BOARD ON/OFF

Use this feature to enable or disable an option
board.
Press the preprogrammed Option Board button to
toggle the option board on or off.
English
23