Installing The Charcoal Filter - GE Over the Range Microwave Oven Installation Instructions Manual

C5.
MOUNT THE MICROWAVE
OVEN
(continued)
Insert 2 self-aligning screws
5
through outer top cabinet
holes. Turn two full turns on
each screw.
Tighten the outer two screws to the top of the
7
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
1400 and 1600 Series
Install grease filters. See the Owner's Manual
8
packed with the microwave.
Installation Instructions
Tighten center
6
screw completely.
1800 Series
22
C6.
INSTALLING THE
CHARCOAL FILTER
On 1400 and 1600 Series models, remove 2 screws
1
on front of grille using a #1 Phillips screwdriver.
On 1800 Series models, remove 2 screws on top
front of grille using a #2 Phillips screwdriver.
Open the door.
2
Remove the grille.
3
Install the charcoal filter. When properly installed,
4
the wire mesh of the filter should be visible from
the front.
Replace the grille and the 2 screws.
5
Close the door.
6
1400 Series Model
Insert mesh-side down
Charcoal
Filter
1600 and 1800 Series Model
Insert mesh-side up